$5 off $49+/$20 off $249+/$60 off $499+/$120 off $999+* Use Promo Code: EARLY26

Engine Rebuild Kits

Engine rebuild kits bundle the core internal parts you need to restore a worn engine's compression and oil pressure in one order. At JEGS, you can compare master and standard kits side by side, then confirm fitment with the Year/Make/Model vehicle selector. You'll find kits for GM 350, 5.3L and 454, Ford 302, 351 and 460, Chrysler 360, and Jeep/AMC 232 and 258 engines.

Show More

What Comes in Engine Rebuild Kits?

Most engine rebuild kits cover the wear parts that control compression, oil clearance, and sealing in a high-mileage engine. Depending on the kit, a standard kit typically includes:

Kit contents vary by engine and part number, so check each product's included-parts list before you order. Anything your kit doesn't list, you'll need to source separately.

Use the Year/Make/Model vehicle selector at the top of the page to narrow results to kits that fit your engine. It's a simple way to avoid ordering a kit for the wrong engine year or block design.

How Do Master Kits Compare With Standard Engine Overhaul Kits?

A master engine rebuild kit typically adds more rotating and oiling parts than a standard kit. This category features Enginetech kits in both styles.

Master kits carry an MK part-number prefix, while standard Engine Rebuild Kits use an RC prefix. Standard engine overhaul kits, sometimes called re-ring kits, focus on rings, bearings, and gaskets. They suit engines with healthy pistons and cylinders that need only a hone and fresh clearances.

Depending on the part number, master kits can also include pistons, a timing kit, and an oil pump. Choose a master kit when your block needs boring or your old parts are worn past reuse. Compare the included-parts list on each product page to see what's in the box.

Which Engine Families Do These Kits Fit?

You'll find kits for a wide range of GM, Ford, Chrysler, and Jeep/AMC engines. Each listing names the engine by liters and cubic inches, such as 5.7L 350, so you can match it to your block.

GM and Chevrolet kits cover the 4.3L 262, 5.3L 325, 5.7L 350, 6.0L 364, 6.2L 376, and 7.4L 454. Ford kits cover the 4.7L 289, 4.9L 300, 5.0L 302, 5.8L 351, and 7.5L 460. You'll also find kits for the Chrysler 5.9L 360, Jeep 3.8L 232, and AMC/Jeep 4.2L 258.

Engines in the same family can change by model year, so a 350 engine rebuild kit for one era may not fit another. Use the vehicle selector and check the listed years before you order. Shop all engines & components for parts that support your rebuild.

How Do You Choose Oversize Sizes Like 030/010/010?

Choose the kit size that matches your block and crank journals after machine work. Some kits list specs in brackets, such as [030/010/010] or [060/010/010]. These numbers typically describe piston oversize, rod-bearing undersize, and main-bearing undersize in thousandths of an inch.

A [030/010/010] kit typically suits a block bored .030 inch over, with rod and main journals ground .010 inch under. STD means standard size. Confirm the order of the numbers in each product's details, and order your kit after the machine shop gives you final sizes.

If your bores and journals are within spec, consider the No Machining Engine Rebuild Kit for 1968-1985 Chevrolet 5.7L. Either way, measure bore, taper, and journal sizes first. You'll need precision tools for that job, covered in our guide to engine rebuild tools.

Should You Rebuild Your Engine or Buy a Crate Engine?

Rebuild your engine when the block and crank are reusable and you want to keep your original engine, such as a numbers-matching classic. A kit lets you control each clearance and reuse the parts that still measure in spec.

A crate engine makes more sense when the block is cracked, worn past its last oversize, or you want to skip machine-shop downtime. Assembled short-block crate engines give you a machined, assembled bottom end ready for your heads and top-end parts.

Weigh the cost of machine work, parts, and your time before you decide. Our breakdown of crate engines and rebuilt engines walks through the tradeoffs in more detail. When you're ready, use the vehicle selector to shop engine rebuild kits for your build.

Vehicle

ADD A VEHICLE TO GUARANTEE PARTS FIT

See products that fit

Frequently Asked Questions About Engine Rebuild Kits

Does an Engine Rebuild Kit Include a Camshaft?

Standard kits typically don't. Some master kits include one, depending on the part number, so check the included-parts list. If yours doesn't, shop camshafts matched to your engine and intended use.

Can You Reuse Your Original Pistons With a Rebuild Kit?

Sometimes. If your cylinders measure within spec and need only a hone, a standard kit lets you reuse good pistons with new rings. If the block needs boring, you'll need oversize pistons that match the new bore size.

What Are the Signs Your Engine Needs a Rebuild?

Common signs include low or uneven compression, blue exhaust smoke, rising oil consumption, and low oil pressure. Bottom-end knocking often points to worn rod or main bearings. Run a compression or leak-down test to confirm before you tear the engine down.

Do You Need to Break In a Rebuilt Engine?

Yes. New rings need time to seat against the cylinder walls, and flat-tappet camshafts typically require a specific break-in procedure. Follow the instructions supplied with your parts, and change the oil after the first run-in period.