How to Select the Correct Inner Tube for Your Drag Slick Tire Size

November 28, 2023  -  Wheels & Tires

16 People Found This Article Helpful

Key Takeaways

  • Size drag slick tubes by tread width, wheel diameter, and tire circumference.
  • Each brand sizes its tubes differently, so use that brand's chart.
  • Tube-type drag slicks always need an inner tube to hold air.
  • Tubeless slicks run lighter but cost more and need closer pressure checks.

JEGS Tech Specialist

Pete Mitchell

It's easy to overlook the inner tube when you're dialing in a drag car. But inside your drag slick tires, the tube plays a big role in traction and launch consistency.

Drag slicks are designed for maximum traction and minimum rolling resistance. The inner tube helps the tire keep its shape and pressure through quick launches, which put extreme wear and tear on the tire.

Whether you're a seasoned drag racer or a novice enthusiast, this guide will help you choose the right drag slick tubes for your car. You'll learn what tubes do, how to measure your slick, how to read each brand's size chart, and whether you can go tubeless.

What You Need to Size a Drag Slick Tube

Tube size charts list tread width, wheel diameter, and tire circumference. You'll need all three numbers before you can pick a small, medium, or large tube.

Here's what to have on hand:

  • Your slick's sidewall size, such as 28 x 10.5-15 (diameter x tread width - wheel diameter).
  • A flexible tape measure, if you want to verify the tire's actual circumference.
  • Your wheel diameter, since the charts below cover 14" to 16" wheels.
  • The size chart from the tube manufacturer you plan to buy.
  • A quick check of your wheel's valve hole, so the tube's valve stem fits it.

Why It's Important to Have the Correct Size Tube for Your Drag Slicks

Before we get into why size matters, let's look at what an inner tube actually does. Launches put immense stress on your tires, and the tube helps the tire withstand it.

The tube supports the tire structure and keeps it from deforming. That gives your drag slicks even pressure distribution, better traction, and longer life, because the tread wears evenly.

On tube-type slicks, the tube is what keeps the tire from leaking. In short, the right tube improves performance and helps your tires last longer.

A tube also helps your slick hold consistent pressure pass after pass. Plus, tubed slicks are generally more affordable than their tubeless counterparts, which makes them a cost-efficient choice.

So why does the correct size matter? A wrong-size tube cancels out the advantages a tubed design should bring.

You risk deforming the tire, which makes the tread wear faster. You'll also see slower starts because of the suboptimal balance of the slicks.

hoosier drag racing slick tire

How to Determine the Correct Size Inner Tube

Drag racing is a niche sport, so the market for inner tubes is fairly small. You might think that makes choosing a tube simple, since only a few options are available.

That's partly true, but understanding each manufacturer's sizing can still take time and effort. The most commonly used inner tubes come from M&H, Mickey Thompson, and Hoosier. These brands generally offer them in three sizes: small, medium, and large.

Drag cars commonly run much smaller wheels than conventional cars. For example, a Ford Mustang usually comes out of the factory on 19" wheels. A drag racer will swap them for 15" or 16" wheels.

Smaller rims and the right drag tires mean less weight and lower rolling resistance. That's why inner tubes are only available for smaller-diameter tires, and why you won't find low-profile drag slicks.

Step 1: Read the Size on Your Slick's Sidewall

Start with the size on the sidewall. Drag slicks list it as diameter x tread width - wheel diameter.

Take a 28 x 10.5-15 slick as an example. It's 28" tall, has a 10.5" tread width, and mounts on a 15" wheel.

Step 2: Convert Tire Diameter to Circumference

Tube size charts list tire circumference, not diameter. To convert, multiply the diameter by 3.1416.

For the 28" example, 28 x 3.1416 works out to about 88". If you want to verify it, wrap a tape measure around the center of the tread.

Step 3: Match Tread Width and Wheel Diameter

Your tread width and wheel diameter both need to fall inside the tube's listed range. A matching circumference alone isn't enough.

If your tire sits near a range boundary, check it against every column. For example, the 28 x 10.5-15 slick lands right at the top of the Hoosier Small range of 80" - 88".

Step 4: Pick the Tube From the Brand's Size Chart

Brands overlap, but their ranges don't line up exactly. Hoosier's Medium tube covers 86" - 100", while the M&H Medium covers 91" - 99".

Always use the chart for the brand of tube you're buying. Here's how the 28 x 10.5-15 example plays out:

  • Hoosier: Small (28808815), right at the top of its 80" - 88" range.
  • M&H: Small (MH900), well inside its 77" - 94" range.
  • Mickey Thompson: Small (9553), right at the top of its 77" - 88" range.

At 88", that slick also touches the bottom of the Mickey Thompson Medium (9555) range. Double-check your measured circumference before you order, and ask one of our experts if you're right on the line.

Below is the inner tube size chart for each brand mentioned above. For a more detailed description of each inner tube, head to JEGS online or ask one of our experts.

JEGS Newsletter Signup

Sign up now to join the JEGS email newsletter and be the first to learn about new products, special deals and e-mail only offers!

Hoosier Inner Tube Size Chart

Inner Tube Size Product Number Tread Width Wheel Diameter Tire Circumference
Small 28808815 6" - 11" 15" - 16" 80" - 88"
Medium 288610015 11" - 13" 15" - 16" 86" - 100"
Large 289410615 15" - 19" 15" - 16" 94" - 106"

M&H Inner Tube Size Chart

Inner Tube Size Product Number Tread Width Wheel Diameter Tire Circumference
Small MH900 8" - 10.5" 14" - 15" 77" - 94"
Medium MH-1050 10.5" 15" - 16" 91" - 99"
Large MH-1450 12" 15" - 16" 96" - 108"

Mickey Thompson Inner Tube Size Chart

Inner Tube Size Product Number Tread Width Wheel Diameter Tire Circumference
Small 9553 8" - 10.5" 15" - 16" 77" - 88"
Medium 9555 10.5" - 11.5" 15" - 16" 88" - 97"
Large 9558 12" - 17" 15" - 16" 97" - 105"

Drag Slick Tube Sizes Compared by Tire Circumference

Tube (Product Number)Tire Circumference Range
Mickey Thompson Small (9553)77" - 88"
M&H Small (MH900)77" - 94"
Hoosier Small (28808815)80" - 88"
Hoosier Medium (288610015)86" - 100"
Mickey Thompson Medium (9555)88" - 97"
M&H Medium (MH-1050)91" - 99"
Hoosier Large (289410615)94" - 106"
M&H Large (MH-1450)96" - 108"
Mickey Thompson Large (9558)97" - 105"

Tire circumference ranges covered by Hoosier, M&H, and Mickey Thompson drag slick tubes (inches), sorted from smallest to largest.

Tips and Common Mistakes When Running Drag Slick Tubes

A correctly sized tube only helps if you install and maintain it right. Keep these tips in mind:

  • Use a drag-racing-specific tube, not a street or farm tube.
  • Dust the tube with talc before installing so it can settle without binding.
  • Don't pinch the tube with the bead or your tire tools when mounting.
  • Line up the tube's valve with the rim's valve hole before seating the bead.
  • Check pressure before every pass, since drag slicks run low pressures and small changes matter.
  • Re-check tube size whenever you change slick sizes, and don't reuse a tube that's out of range.

Can You Go Tubeless With Drag Slicks?

Yes, you can go tubeless with drag slicks, as long as the slick is a tubeless design. Tube-type slicks always need to run with inner tubes.

There are two types of drag slicks: tube-type and tubeless. Tubeless slicks can run with or without tubes, but there's no substantial benefit to adding one.

The main reason to go tubeless is weight. Tubeless slicks have lower mass than tubed ones, so there's less inertia to overcome at launch and acceleration is faster.

That matters most on less powerful cars, such as ones with naturally aspirated engines. Racers often use a rule of thumb that 1 lb of unsprung weight equals about 8 lb of sprung weight. That's why wheel and tire weight gets so much attention.

Inner tubes can also leak or rupture, which can throw off the tire's balance. On the other hand, tubeless slicks are harder to manufacture, so you'll pay more for them in a sport that's already expensive.

Here's how the two setups compare:

  • Tubeless slicks are lighter and potentially quicker, but they cost more and need constant pressure monitoring.
  • Tubed slicks are more affordable and hold consistent pressure, but they add weight.

Whatever you decide, head to JEGS for an extensive range of performance parts for your dragster, including tubed and tubeless drag tires and inner tubes.

Shop All Tire Inner Tubes

Conclusion

Choosing the right drag slick tubes comes down to three numbers. Read your slick's sidewall size, convert the diameter to circumference, then confirm your tread width and wheel diameter fall inside the tube's range.

Use the chart for the brand you're buying, since Hoosier, M&H, and Mickey Thompson size their tubes differently. If you're right on a boundary, measure the tire before you order.

Tube-type slicks always need a tube, while tubeless slicks trade a higher price for less weight. Once you have your numbers, shop drag slick tubes at JEGS.

Want more drag racing tech? Read More

Frequently Asked Questions

Do Drag Slicks Need Tubes?

Tube-type drag slicks always need tubes, so check the listing for M&H Racemaster slicks and other brands before you buy. Tubeless slicks don't, and adding a tube to one offers little benefit.

What Size Tube Do I Need for a 28 x 10.5-15 Slick?

At about 88" circumference, a 10.5" tread, and a 15" wheel, it fits the Small tube in the Hoosier, M&H, and Mickey Thompson charts. It sits at the top of the Hoosier and Mickey Thompson Small ranges, so measure your tire to confirm.

Can You Put a Tube in a Tubeless Drag Slick?

Yes, but there's no substantial benefit, and the tube adds weight you'll have to accelerate at launch. If you're still weighing setups, compare drag radials vs. slicks.

How Do I Install a Tube in a Drag Slick?

Dust the tube with talc, mount one bead, and insert the tube with the valve lined up to the valve hole. Then seat the second bead without pinching the tube, and see our guide on how to mount new drag slicks for the full process.

Can You Reuse a Drag Slick Tube on a Different Tire?

Only if the tube is undamaged and the new slick's tread width, circumference, and wheel diameter all fall inside its range. Our beginner's guide to drag tires covers more on choosing slicks.

Did you find this article Helpful?

Related Articles