Battery Terminals, Cables, Connectors & Battery Terminal Kits

To replace car battery terminals, the first step is to remove the cables from the battery. Always remove the negative terminal first, and then the positive terminal. Next, cut off the battery cable from the terminal, as close to it as possible to keep the cable length. Then strip the sheathing from the cable, just enough to allow the copper to properly contact the terminal. Finally, assemble the terminal on the stripped battery cable end. There are different types of connector assemblies. One type uses a strap with bolts and nuts to clamp the connector to the wire. Another version assembles with a compression fitting, by wedging the cable between the terminal and a nut. A third version uses a crimp connection where the cable is put into the tube-end of the terminal and then squeezed tight to secure the connection. Once the replacement terminal is assembled, the cables can be reattached to the battery, positive cable first, then the negative terminal.

To replace battery cables, first remove the car battery cables from the battery. Remove the negative terminal first, and then the positive terminal. Next, follow the cable and disconnect any securing clamps until you reach the other end. Typically, the positive cable is connected to the starter solenoid. Negative cables either attach to the frame or engine block. Once the old cable is removed and the new one is installed (battery connections in reverse order with positive cable first, then negative cable), battery cable replacement is complete.

There are many options to buy replacement battery terminals and cables online, but only one clear destination. With over 60 years in the business, JEGS has been selling automotive electrical components for a long time, offers competitive prices, and ships in-stock parts fast, often the same day.

A JEGS expert is ready to answer your questions and help you find the battery terminals and cables that you require for your specific application.