Camshafts
Camshafts control when your engine's intake and exhaust valves open and close, so the cam you choose shapes idle quality, low-rpm torque, and top-end power. Choose from hydraulic flat tappet, solid flat tappet, hydraulic roller, retro-fit hydraulic roller, and solid roller cams for Chevy, Ford, Mopar, AMC, and Holden engines. You can compare street, towing, marine, nitrous, blower, and drag-race grinds in one place, then use the spec guidance below to narrow your pick.
Show More
What Types Of Camshafts Can You Shop Here?
You'll find five cam types in this part of our camshafts & valvetrain category, split by lifter style and rpm potential. Always match the cam to the lifters it was designed for.
- Hydraulic flat tappet cams keep a street build affordable, but they need break-in and high-zinc oil.
- Solid flat tappet cams support higher rpm and need periodic lash adjustment.
- Hydraulic roller cams use a wheel that rides the lobe, which cuts friction and allows more aggressive profiles.
- Retro-fit hydraulic roller cams bring roller lifters to engines originally built for flat tappets.
- Solid roller cams suit drag-race engines, with some grinds rated for 5000-9000 rpm.
Hydraulic lifters maintain lash automatically, so they're the low-maintenance choice. Roller designs cost more, while a flat tappet camshaft stretches your budget further. For a side-by-side breakdown, read our guide to flat vs roller tappets.
How Do You Match A Cam To Your RPM Range And Use?
Pick a cam whose rpm range matches where your engine spends most of its time. A street car that stays below 4500 rpm works well with a cam rated for idle-5500 or 1500-6500 rpm. Race engines move the band higher, with ranges such as 2500-7000 or 3500-8000 rpm.
The most common mistake is choosing a cam that's too large. Extra duration costs you low-rpm torque and idle quality, so pick the smaller cam when you're undecided.
Your application matters as much as rpm. This category includes towing, marine, nitrous, and blower or turbo grinds. You'll also find stock-replacement cams such as a Chevrolet Performance hydraulic roller for 2007-2014 5.3L engines with AFM/DOD. Work through our step-by-step guide to choosing a camshaft before you order. If you'd rather buy matched parts in one order, compare camshaft kits.
How Do You Read Camshaft Lift And Duration Specs?
Lift, duration, and lobe separation angle tell you most of what a cam will do. Valve lift equals lobe lift times rocker ratio, so a .400 in. lobe with a 1.5:1 ratio gives .600 in. of valve lift.
Duration measured at .050 in. tappet lift is the industry standard for comparing cams. More duration adds high-rpm airflow but gives up low-rpm torque and smooth idle.
Lobe separation angle on most performance cams falls between 104 and 115 degrees. A narrow LSA adds overlap, a rougher idle, and less vacuum. A wide LSA delivers a smoother idle, more vacuum, and a broader powerband. Learn how each number fits together in our guide to reading camshaft specs, or start with camshaft fundamentals for first-time builders.
Which Valvetrain Parts Should You Replace With A New Cam?
Start with new lifters, since every new flat tappet cam needs them, then check the rest of the valvetrain. In a pushrod engine, the lobes push the lifters, which move the pushrods and rocker arms. The crankshaft drives the cam through the timing set, so check your timing chains & gears while you're in there.
- Confirm your valve springs match the cam maker's recommendation.
- Plan for a retainer plate when you install a retro-fit hydraulic roller cam.
- Measure pushrod length, since a retro-fit roller may need a different size.
- Inspect the camshaft bearings if the block is already apart.
Let your cam's lift and rpm range guide every part you pair with it. Order these parts together so your valvetrain works as a matched system.
Which Brands And Materials Are Used In Performance Camshafts?
Cams in this category come in cast iron for cost-effective street use and billet steel for race strength and high spring pressure. You'll also see forged 5150 and 8620 hydraulic rollers for GM LS engines.
COMP Cams grinds cover Magnum retro-fit hydraulic rollers for 396-454 big-block Chevy engines and the Xtreme Marine XM308HR, rated for 3500-6500 rpm. Their range also includes Nitrous HP and Blower and Turbo grinds. Crower offers Compu-Pro hydraulic cams for Mopar 350-440, an 8620 billet roller for Ford 332-428, and a Hi-Draulic Hauler cam for the 351W. Crower also covers AMC 290-401 and Holden 253-308 engines.
For Ford FC V8 builds, look at the Lunati cam listed here. Filter the product grid by engine family to find the cam that fits your block.
ADD A VEHICLE TO GUARANTEE PARTS FIT
See products that fit
ADD A VEHICLE TO GUARANTEE PARTS FIT
See products that fit

MELLING
MDK400 AFM (Active Fuel Management) Delete Kit for 2014-2020 Chevy, GMC Trucks & Suvs w/Gen V LT 5.3L Engines Only
Part Number: 689-MDK400

MELLING
MDK400 AFM (Active Fuel Management) Delete Kit for 2014-2020 Chevy, GMC Trucks & Suvs w/Gen V LT 5.3L Engines Only
Part Number: 689-MDK400

BRIAN TOOLEY RACING BTR
BTR-TRUCKNORRIS Hydraulic Roller Camshaft for GM Gen III/IV LS Truck Engines
Part Number: 559-TRUCKNORRIS

BRIAN TOOLEY RACING BTR
BTR-TRUCKNORRIS Hydraulic Roller Camshaft for GM Gen III/IV LS Truck Engines
Part Number: 559-TRUCKNORRIS

BRIAN TOOLEY RACING BTR
BTR-TRUCKNORRISNSR Hydraulic Roller Camshaft for GM Gen III/IV LS Truck Engines
Part Number: 559-J000003

BRIAN TOOLEY RACING BTR
BTR-TRUCKNORRISNSR Hydraulic Roller Camshaft for GM Gen III/IV LS Truck Engines
Part Number: 559-J000003

COMP CAMS
Xtreme Energy 268H Hydraulic Flat Tappet Camshaft Only Lift: .477" /.480" Duration: 268°/280° RPM Range: 1600-5800
Part Number: 249-12-242-2

COMP CAMS
Xtreme Energy 268H Hydraulic Flat Tappet Camshaft Only Lift: .477" /.480" Duration: 268°/280° RPM Range: 1600-5800
Part Number: 249-12-242-2

COMP CAMS
Thumpr Hydraulic Flat Tappet Camshaft Lift .479"/.465" Duration 279/297 RPM Range 2000 to 5800
Part Number: 249-12-600-4

COMP CAMS
Thumpr Hydraulic Flat Tappet Camshaft Lift .479"/.465" Duration 279/297 RPM Range 2000 to 5800
Part Number: 249-12-600-4

FORD PERFORMANCE
M-6550-M52 High Performance Cams for Ford Gen 2 Coyote 5.2L Cylinder Heads
Part Number: 397-M-6550-M52

FORD PERFORMANCE
M-6550-M52 High Performance Cams for Ford Gen 2 Coyote 5.2L Cylinder Heads
Part Number: 397-M-6550-M52

COMP CAMS
Big Mutha" Thumpr Hydraulic Flat Tappet Camshaft Lift .500"/.486" Duration 295/313 RPM Range 2500 to 6400
Part Number: 249-12-602-4

COMP CAMS
Big Mutha" Thumpr Hydraulic Flat Tappet Camshaft Lift .500"/.486" Duration 295/313 RPM Range 2500 to 6400
Part Number: 249-12-602-4

JEGS
Hydraulic Roller Camshaft for 1987-2002 GM Small Block w/OEM Hydraulic Roller Cam
Part Number: 555-200500

JEGS
Hydraulic Roller Camshaft for 1987-2002 GM Small Block w/OEM Hydraulic Roller Cam
Part Number: 555-200500

COMP CAMS
HRT Hydraulic Roller Camshaft 2009-Up Dodge HEMI 5.7L w/VVT - Stage 1 Performance
Part Number: 249-201-300-17

COMP CAMS
HRT Hydraulic Roller Camshaft 2009-Up Dodge HEMI 5.7L w/VVT - Stage 1 Performance
Part Number: 249-201-300-17
![Hydraulic 3-Bolt Roller Camshaft for 1997-2015 GM Gen III/IV LS Engines [298/309 Duration, 612/612 Lift, 110 LSA]](https://www.jegs.com/images/mini_100/500/555/555-200585.jpg)
JEGS
Hydraulic 3-Bolt Roller Camshaft for 1997-2015 GM Gen III/IV LS Engines [298/309 Duration, 612/612 Lift, 110 LSA]
Part Number: 555-200585
![Hydraulic 3-Bolt Roller Camshaft for 1997-2015 GM Gen III/IV LS Engines [298/309 Duration, 612/612 Lift, 110 LSA]](https://www.jegs.com/images/mini_200/500/555/555-200585.jpg)
JEGS
Hydraulic 3-Bolt Roller Camshaft for 1997-2015 GM Gen III/IV LS Engines [298/309 Duration, 612/612 Lift, 110 LSA]
Part Number: 555-200585

COMP CAMS
High Energy 268H Hydraulic Flat Tappet Camshaft Lift: .454" /.454" Duration: 268°/268° RPM Range: 1500-5500 C.A.R.B. Approved*
Part Number: 249-12-210-2

COMP CAMS
High Energy 268H Hydraulic Flat Tappet Camshaft Lift: .454" /.454" Duration: 268°/268° RPM Range: 1500-5500 C.A.R.B. Approved*
Part Number: 249-12-210-2

MELLING
MDK200 MDS (Multi-Displacement System) Delete Kit for Select Chrysler, Dodge Cars & Dodge, Jeep SUVs w/5.7L Hemi Engines
Part Number: 689-MDK200

MELLING
MDK200 MDS (Multi-Displacement System) Delete Kit for Select Chrysler, Dodge Cars & Dodge, Jeep SUVs w/5.7L Hemi Engines
Part Number: 689-MDK200
Frequently Asked Questions About Camshafts
How Do You Break In A Flat Tappet Camshaft?
Coat the lobes and lifters with assembly lube, fill the engine with high-zinc break-in oil, and prime the oil system. Once it fires, hold 2000-2500 rpm for 20-30 minutes without idling. Then change the oil and filter.
What Is A Cam Card And Why Should You Degree The Cam?
A cam card lists the grind's lobe lift, duration, LSA, intake centerline, and lash. Degree the cam during installation so you can verify it against those numbers. Keep the card with your build records for future tuning.
How High Can A Hydraulic Roller Camshaft Rev?
Most OEM hydraulic roller cams are limited to about 6200 rpm. COMP Cams puts aftermarket hydraulic roller systems at about 6800 rpm. If your build needs more, a solid roller camshaft supports higher rpm with periodic lash adjustment.
Which Distributor Gear Matches Your Camshaft Material?
Your distributor gear must match the cam material. Run a cast-iron or composite gear with a cast-iron cam. Use a bronze or composite gear with a billet-steel roller cam.























