Small Block Chevy 350 Distributors: Buying Guide

June 04, 2024  -  Engines & Components

6 People Found This Article Helpful

Key Takeaways

  • The best Chevy 350 distributor depends on your timing, coil style, and power goals.
  • An HEI distributor is the easiest drop-in for most street 350s.
  • Match the distributor gear to your cam and confirm ignition box needs.
  • A distributor alone adds up to about 10 horsepower when tuned correctly.

JEGS Tech Specialist

Pete Mitchell

The Chevy 350 small block is a versatile platform. While you won't make a crazy amount of horsepower out of the gate, it's an easy engine to work on, and the aftermarket support for this platform is massive. Plus, once you start upgrading the engine with new parts, like a new distributor, you can reach this engine's true potential and add 100, 200, and even more than a combined 300 horsepower to your Chevy 350 small block engine.

You must have the foundation to make immense power with your engine, so don't overlook the little things. Distributors are small components that distribute electricity from the ignition coil to the spark plugs at the correct time. While it's a small part, it plays a colossal role in engine performance because your engine won't run properly or even start at all. Furthermore, upgrading your distributor or altering the timing can help you improve your engine's performance beyond its stock capabilities and prepare it for additional modifications.

While this may sound like a lot, we're here to help you find the right Chevy 350 distributor. Below, we'll cover the main types, how to choose one, our top picks, install steps, and the warning signs of a bad distributor. Let's get into it.

The Best Aftermarket Distributors For A Small Block 350

The best aftermarket distributors for a small block 350 are typically HEI distributors, and for most street builds, that's the best place to start. However, other distributors can also work. Ultimately, the best aftermarket distributor for a Chevy 350 small block depends on your specific application. You'll want to consider the timing you need to achieve, if you want an internal or external coil, and how much power you plan on making.

One of our favorite aftermarket distributors is the JEGS SSR-II Pro Series Distributor. You'll love that it can maintain proper timing at upwards of 10,000 RPMs without giving you problems. For Chevy enthusiasts who want to squeeze every ounce of power out of their engine, dropping this distributor in can make a huge difference, especially in conjunction with other parts. We also like the JEGS HEI Distributor for Small Block and Big Block Chevy. While it's more basic than the Pro Series distributor, it's the perfect replacement for a complete rebuild or an original-style replacement.

If any of these distributors interest you, don't worry. We'll have more information about them below. Plus, JEGS carries both of them along with our extended protection plan options.

What Types Of Chevy 350 Distributors Are There?

Most small block Chevy distributors fall into five types. The big differences are where the coil lives, whether you need a separate ignition box, and who controls the timing. Here's how they compare.

Type Ignition Box Needed? Cap Size Best For
HEI No Large (about 5-6 in. across, coil in cap) Street 350s and simple 1-wire swaps
Small-Cap Billet Yes (CD ignition box) Small High-RPM and tight-clearance builds
Ready-To-Run No (built-in module) Varies by model Performance upgrades without a box
Points No Original-style Period-correct restorations
Computer-Controlled (TBI, TPI, Vortec) No (ECU controls timing) Large (internal coil) or small (remote coil), by year Factory fuel-injected 350s

Chevy 350 distributor types compared by ignition box needs, cap size, and best use.

HEI Distributors

An HEI (High Energy Ignition) distributor puts the coil right in the cap. That means you only need a simple 1-wire hookup. The tradeoff is size, since the large cap measures about 5-6 inches across.

Small-Cap Billet Distributors

Small-cap billet distributors use a magnetic pickup and an external coil. They need a CD ignition box to fire, which is why the JEGS SSR-II Pro Series is built to pair with one. You'll get a smaller body and precise timing at high RPM.

Ready-To-Run Distributors

A ready-to-run distributor has the ignition module built in, so you don't need a separate box. You'll typically wire it with three connections: power, coil negative, and ground. It's a popular middle ground between a basic HEI and a box-required setup.

Points Distributors

Points distributors are the original-style design found on older small blocks. They work, but the points need regular maintenance to keep timing steady. If you'd rather skip that upkeep, you can switch to an electronic distributor or install an electronic ignition conversion kit, such as a PerTronix Ignitor.

Computer-Controlled Distributors (TBI, TPI, Vortec)

On TBI, TPI, and Vortec 350s, the engine computer (ECU) controls the timing. You'll want a distributor made for your system, like the Vortec Street Spark distributor for 1996-2000 5.7L engines. A standard carbureted HEI won't talk to the ECU.

How Do I Choose The Right Distributor For My Chevy 350?

Before you buy, check five things: your cam, your ignition setup, your clearance, your wiring, and how you'll use the car. Getting these right up front saves you from a return or a no-start.

Match The Distributor Gear To Your Camshaft

Your distributor gear has to be compatible with your cam gear. A steel or iron gear works with flat tappet and hydraulic roller cams. If you're running a solid roller, you'll need a bronze or other compatible gear.

For example, the JEGS HEI Distributor uses an OE-style 0.491" shaft. It needs a different gear if you're running a solid roller cam, so see our guide to choosing the correct distributor gear for your camshaft.

Decide Whether You Need An Ignition Box

HEI and ready-to-run distributors don't need a separate ignition box. Small-cap billet units like the SSR-II do. If you don't already own a CD box, factor one into your budget before you buy a box-required distributor. Our ignition basics guide explains how CD ignition boxes work.

Check Firewall And Intake Clearance

A large HEI cap can crowd the firewall, intake, or a blower. If space is tight, a small-cap billet distributor gives you more room. On non-standard deck or intake heights, an adjustable slip collar, like the one on the SSR-II, lets you set the gear depth correctly.

Plan Your Power Wiring

An HEI distributor needs full 12-volt switched power. It won't run right on the resistor wire used with older points systems. If you're not sure which feed you have, learn how to read automotive wiring diagrams before you start. If your vehicle didn't come with HEI, JEGS 555-10552 power and tach feed wires make the hookup easier.

Vacuum Vs. Mechanical Advance

Most street cars benefit from vacuum advance for better part-throttle response. Race setups often run mechanical advance only. Pick the advance style that fits how you'll actually drive the car.

How To Get More Horsepower With Your Small Block Chevy 350 Distributor

Increasing horsepower with a distributor alone is possible, but expect minimal gains unless you upgrade the surrounding engine systems, such as the camshafts and valvetrain. Your best bet is to buy an upgraded aftermarket distributor to get more horsepower. You can also change the timing of the distributor to improve power.

Some distributors may also help you achieve precise timing at higher RPMs, which can help you gain better top-end power for racing applications. Still, upgrading other components alongside the distributor is a good idea if you want to get more horsepower out of your Chevy 350 small block.

JEGS Newsletter Signup

Sign up now to join the JEGS email newsletter and be the first to learn about new products, special deals and e-mail only offers!

How Much Horsepower Can You Add From An Engine Distributor?

Adding a distributor can help you improve your 350 small block's power. If everything is tuned correctly, you can expect to gain up to 10 horsepower with a new distributor. Some high-performance options may help you squeeze even more power out of your engine, but significant horsepower gains are rarely attributed to the distributor alone. However, a faulty distributor or the wrong timing can tank your performance. If your engine feels sluggish, it's not a bad idea to check the distributor for problems.

While this is about as far as you can go with the distributor, you can upgrade the carburetor, install new spark plugs, change to aluminum cylinder heads, and install a dual-plane intake manifold. Our in-depth guide for upgrading your Chevy 350 explains how to add up to 300 extra horsepower.

Small Block Chevy 350 Engine Distributor Specs

The specs for a Chevy 350 distributor will vary based on the part and the timing you're after. Aftermarket parts may use different specs than OEM distributors to hit the timing and power you want. That said, here are the common specs you'll want to check:

  • Set base timing at an average of 12-18 degrees before top dead center (BTDC). You do this by rotating the distributor at idle while reading a timing light.
  • Expect total advance of 34-36 degrees BTDC on most small block Chevys, but confirm it's correct for your application.
  • Look for an aluminum housing, which you'll typically find on aftermarket high-performance distributors.
  • Plan on a 45,000-65,000-volt coil, depending on the distributor kit or ignition system you have.
  • Upgrade your spark plug wires to a larger diameter so they can deliver the increased voltage to the spark plugs.
  • Expect an HEI-style cap on many options.
  • Confirm whether you need an ignition box, since some distributors require one and others don't.
  • Expect a magnetic trigger on most electronic units.
  • Check for vacuum advance (for most street vehicles) and mechanical advance.

These specifications vary based on the part, but most options will fall within a similar range.

Most Popular Small Block Chevy Distributors

JEGS HEI Distributor for Small Block and Big Block Chevy

JEGS HEI Distributor for Small Block and Big Block Chevy

JEGS SSR-II Pro Series Distributor With Adjustable Slip Collar

JEGS SSR-II Pro Series Distributor, w/Adjustable Slip Collar

MSD Ignition Pro-Billet Distributor

MSD Ignition Pro-Billet Distributor

Holley Sniper EFI HyperSpark Distributor

Holley Sniper EFI HyperSpark Distributor

Best Distributors For Chevy 350

Chevy 350 small block distributors vary in quality, especially if you're looking for aftermarket options. While most distributors have similar specs, you'll find that some distributors are made better than others. Performance distributors may be better suited for specific applications if you plan on adjusting the timing. Learn about our top picks for the Chevy 350 small block below.

JEGS HEI Distributor For Small Block And Big Block Chevy

The JEGS HEI Distributor for Small Block and Big Block Chevy is the best choice when you need a new distributor for your Chevy small block 350 engine. It comes with everything you need for an easy installation and drops right into place with a simple 1-wire hook-up. The JEGS HEI Distributor for Small Block and Big Block Chevy distributor is also durable, well-made, and will last you for years. It's built with a CNC aluminum body and a high-voltage coil that can handle more shock without any problems. Coated weights are also included for corrosion resistance.

Best for: Stock rebuilds and mild street 350s that want a simple 1-wire swap.

JEGS SSR-II Pro Series Distributor, With Adjustable Slip Collar For Chevy Small Block And Big Block V8 Engines

When you want a distributor that will improve your performance, you can't go wrong with JEGS SSR-II Pro Series Distributors. These distributors are made for seamless integration with CD ignition boxes and are engineered from CNC-machined forged aluminum. This makes them one of the more durable housings on the market, and they shouldn't have any problems standing the test of time.

Furthermore, the high-quality distributor cap and distributor rotor use premium brass terminals for optimal conductivity at any voltage you need. This premium construction makes it one of the best high-performance distributors on the market. You can enjoy precise timing up to 10,000 RPMs, which is more than enough for your Chevy 350 small block. Plus, you can leverage the advance curve kit to take full advantage of enhanced timing.

Best for: High-RPM builds paired with a CD ignition box.

Speedmaster 8000-Series Pro-Billet Distributor Small Block Chevy 350/Big Block Chevy 454 [Red Cap]

The Speedmaster 8000-Series Pro-Billet Distributor Small Block Chevy 350/Big Block Chevy 454 is a great choice from the Speedmaster performance parts lineup and is designed for car enthusiasts. If you have a lot of mods on the engine, enough where any extra space is helpful, this distributor is perfect for you. While it can help you save on space, it's well-made and precision-machined with billet 6061-T6 aluminum built to last, so you don't have to compromise on the quality.

The 1/2" steel shaft is also guided by a long sintered bushing and a sealed ball bearing to locate the reluctor precisely. This combination aims to help you achieve stable timing and spark delivery at any RPM that your Chevy 350 small block can handle. There is also a Speedmaster 6000-Series HEI Distributor if that's more your speed.

Best for: Crowded engine bays where a smaller distributor body helps.

How Do You Install A Distributor On A Chevy 350?

Swapping a distributor is a straightforward job you can handle in your garage. The key is finding top dead center (TDC) first, so your timing starts in the right place. Grab a timing light and follow these steps.

  1. Disconnect the battery. If you're replacing an old unit, mark where the rotor points and how the housing sits before you pull it.
  2. Find TDC on cylinder #1. Turn the engine by hand until the #1 piston is at the top of its compression stroke and the timing mark lines up at zero.
  3. Drop in the new distributor. Install the gasket, then lower the distributor with the rotor pointing at the #1 terminal on the cap.
  4. Seat it on the oil pump drive. If it won't drop fully, bump the engine slightly until the shaft engages, then recheck that the rotor still points at #1.
  5. Snug the hold-down clamp. Leave it loose enough that you can still turn the distributor to set timing.
  6. Wire it up. Connect the plug wires in the 1-8-4-3-6-5-7-2 firing order, moving clockwise, since the rotor turns clockwise on a small block Chevy. Then connect 12-volt switched power for an HEI.
  7. Set your timing. Start the engine, set initial timing with a timing light, and tighten the clamp. Then check total advance at higher RPM.

What Are The Signs Of A Bad Distributor?

A worn or failing distributor usually tells you something's wrong before it quits. Watch for these symptoms:

  • Hard starting or a no-start condition
  • Misfires or a rough idle
  • Stalling or hesitation when you accelerate
  • Timing that won't hold where you set it
  • A worn cap or rotor with cracks, carbon tracking, or burned terminals
  • Excessive side-to-side play in the shaft

If you just installed a new distributor and it won't run right, check for these common mistakes:

  • Installing it 180 degrees out: The rotor points at #1 on the exhaust stroke instead of compression.
  • Using the wrong gear for your cam: A mismatched gear can wear out quickly and damage the cam.
  • Running an HEI on a resistor wire: An HEI needs full 12 volts to deliver its spark.

Ready To Upgrade Your Chevy 350 Distributor?

The right Chevy 350 distributor starts with your setup. An HEI is the easiest drop-in for most street builds, while a small-cap billet unit with a CD box suits high-RPM engines. Computer-controlled 350s need a distributor made for their system.

Before you buy, confirm your cam gear, ignition box needs, and clearance. Then install it at TDC on cylinder #1 and set your timing with a timing light. When you're ready, shop our full lineup of ignition distributors below.

Shop All Ignition Distributors

Frequently Asked Questions

What Is The Best Distributor For A Chevy 350?

For most street builds, an HEI distributor is the best choice because it's a simple 1-wire drop-in. For high-RPM engines, a billet distributor paired with a CD ignition box, such as an MSD ignition box, is the better fit.

What Years Did Chevy Use The HEI Distributor?

HEI became standard on Chevy V8s in the mid-1970s and stayed in use until computer-controlled ignition systems took over. HEI ignition tune-up kits are still available to keep original units running.

Can You Run An HEI Distributor With TBI?

TBI engines use computer-controlled timing, so a standard HEI won't work without a carburetor conversion or an EST-compatible distributor. Our guide to carburetor vs. fuel injection explains the tradeoffs.

What Is The Firing Order For A Chevy 350?

The Chevy 350 firing order is 1-8-4-3-6-5-7-2. The rotor turns clockwise, so you wire the cap in that order moving clockwise.

How Easy Is It To Replace A Distributor?

It's a straightforward DIY job if you mark the rotor position or find TDC on cylinder #1 first with a top dead center indicator. Most of your time goes into setting the timing afterward.

How Do You Tell If A Distributor Is Bad?

Hard starting, misfires, stalling, timing that won't hold, and a cracked or burned cap and rotor are the most common signs. Excessive shaft play is another clue that it's time for a replacement.

Did you find this article Helpful?

Related Articles