Items You Need
Stage 3+ Kits
APR T3100079
Breakdown of Included Hardware Items
Features:
- Produces up to 536 horsepower
- Delivers big top-end power and extreme responsiveness
- The ECU software upgrade installs on the factory ECU and requires no extra end-user configuration or tuning
- 71 mm forged-billet compressor wheel providing up to 60 lb./min. in airflow
- Titanium aluminide (Gamma-Ti) lightweight turbine wheel
- Internally-gated stainless steel turbine housing
- Ceramic ball bearing housing
- Integrated recirculation port for mounting the factory diverter valve (DV), boost control solenoid (N75), and wastegate actuator
- The TurboSmart pneumatic wastegate is pre-load set and bolts-on without any modification necessary
- Stainless steel turbocharger heat shield
- Multi-ply silicone inlet and outlet hoses with an EZ-Flow stepped design and fluoro-silicone coating
- CNC-machined billet aluminum adapters mimic the OEM mounting surfaces for the PVC hose and intake hose
- 3 in. V-band T304 stainless steel exhaust outlet pipe with OEM-style flex section and (1) non-protruding oxygen sensor bung - must be adapted to the existing exhaust system
- AEM stainless steel 5-BAR sensor attaches to the manifold through the included APR Stage-3 boost tap
- Braided stainless steel oil feed and drain lines with CNC-mandrel bends
- Rubber coolant and heater hoses with anti-abrasion shrink-flex material
- DEI heat shielding protects the coolant lines from heat soak
- Plug-and-play extension wiring harnesses for the MAP sensor, wastegate solenoid, and diverter valve (DV)
- NGK racing spark plugs combat raised cylinder pressures and temperatures - operate at heat ranges colder than OEM
Notes:
- Specific software is required to use this system - Software compatibility must be checked before the purchase
- The software installs to your vehicle's factory ECU and can only be installed by an Authorized APR dealer
- May require transmission and engine internal upgrades
- Designed for use with APR Fueling Kit (172-MS100111), exhaust mid-pipe, upgraded intake, intercooler, and transmission software
- NGK spark plugs NGK-R7437-9 (heat range 9) should be gapped to 0.024 in. ±0.002 in. (0.6 mm ±0.05 mm) with a change interval of 10-15,000 miles (16-24,000 km)
Emissions: This part is legal for sale or uses on Racing Use Only Vehicles. The following vehicles are considered Racing Use Only Vehicles:
- Vehicles that are used exclusively for a competition that are not registered and that may never be used on the street
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.