AP Radi-CAL R2 (Super 600) Hi-Temp Racing Brake Fluid: Designed for extreme, high temperature racing conditions with a dry boiling point in excess of 572 degrees Fahrenheit. Exceeds DOT 3 standards.
AP Racing PRF Racing Brake Fluid: Developed for extreme, high temperature racing conditions (dry boiling point of 608 degrees F). Exceeds DOT 4 specifications.
Castrol SRF Brake Fluid has a wet boiling point of 518 deg. F (270 deg. C) which exceeds DOT 3 and 4 standards. Do not mix Castrol SRF and other brake fluids, as this will reduce the benefits of Castrol SRF. Sold in 1 liter containers (33.8 ozs.)
Motul 600 Brake Fluid: 100% synthetic brake fluid has an extremely high boiling point helping to prevent vapor lock and brake fade during hard use. Motul 600 exceeds DOT 3 and DOT 4 specifications. Dry boiling point 594° F, wet boiling point 421° F.
Motul 660 Brake Fluid: 100% synthetic brake fluid is specifically designed to resist extreme temperature generated by racing carbon and ceramic brakes. Motul 660 exceeds DOT 3, DOT 4 and DOT 5.1 specifications. Dry boiling point 617° F, wet boiling point 401° F.
- y_2019, m_5, d_24, h_8
- bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
- cp_1, bvpage1
- co_hasreviews, tv_0, tr_4
- loc_en_US, sid_10001_10001_1732931, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
- bvseo-msg: The resource to the URL or file is currently unavailable.;
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.