GM F-Body - 4th Gen
BMR Tubular K-members are a 100-percent bolt-in design to provide a lightweight alternative to the factory K-member as well as provide additional clearance for aftermarket headers and turbo systems. The unique construction on the V8 models feature integrated frame stands that replace the factory cast iron frame stands. This additional weight reduction allows them to use larger diameter tubing and thicker mounting plates for additional strength over the competition. This means that you can use the K-member for street use, road race, autocross, or drag strip use. Each BMR K-member is built with provisions for either a factory or manual steering rack. BMR K-members are built exclusively using larger diameter 1-5/8" x .120" and 1-1/4" x .095" tubing yet still remain up to 7.5 lbs. lighter than the competitions due to their integrated mount design. Using a BMR tubular K-member and upper/lower a-arm set, expect a minimum weight reduction of 42 lbs. Combine this with a coil-over style spring/shock combo and a lightweight front brake setup and lose over 100 lbs. off the front end! Installation time is about 4-5 hours.
The LS1 K-Member eliminates both cast iron motor stands by using a tubular integrated design. This unique design allows an even further weight reduction. Total K-Member weight including both frame stands is 24.5 lbs.
Reduce Weight And Increase Stability With These Upgraded K MembersBMR Tubular K-members reduce weight while providing more room for large tube headers and turbo systems. K-Members feature larger diameter tubing and thicker mounting plates for additional strength. Designed for street use, road race, autocross, or drag strip use. Features
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.