The Biondo Digital Mega Dial is a two-piece unit, and both the control head and the display board require 12V or 16V power and ground to operate. The control head is typically placed near the driver, and the display board is mounted to face the tower. This unit is independent and works along side any delay box, throttle stop, or ignition. With the Mega Dial, you can avoid dial-in errors, and have the option to change your dial-in, right up to the last second. This unit also has the ability to store two times in memory, called ''Time 1'' and ''Time 2'', allowing for large number changes without a lot of time wasted scrolling. This can be beneficial for 1/4 mile and 1/8 mile racers, they can store 2 different dial ins, or a driver who ''super'' class races can store his ''super'' dial in, and his bracket dial in. The Mega Dial can be mounted to window or Lexan with Hook & Loop strips, and will fit inside any dial board bracket that is 7.5'' wide such as the dragster mount (p/n 376-BRP-DB-3) for 3'' Goza-style air pans listed below.
Control Box Specs:
- Size: 4" x 3" x 1-3/8"
- Overall size with mounting tabs: 5-3/8" x 3" x 1-3/8"
- Range: 0.00 to 19.99
- Lock feature to prevent accidental changing of dial-in
- Bright/Dim feature for day/night racing
- 12 or 16 volt compatible
- Size: 9-1/2" x 5-1/2" x 1-1/4"
- Mounting Hole Pattern: 8.75" x 3"
- Board is mounted in a protective aluminum enclosure
- LED numbers can be seen in direct sunlight
- Bright/Dim feature for day/night racing (set on the control box)
- 12 or 16 volt compatible
- Additional V2 Dial Display Boards can be added (sold separately)
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.