R5 Dual-Action Red Backing Plate
Features:
- Small 3'' dual action polisher backing plate
- Perfect for polishing small areas and hard-to-reach spots
- Fits any DA polisher that accepts 5/16’’ - 24 spindle accessories
- TORQ10FX, TORQX, Porter Cable 7424XP, Griot’s 6’’, Meguiar’s G110, Meguiar’s MT300
- Hyper-Flex Technology conforms to all automotive curves and contours
- Delivers finer results in less time and less energy
- Cooling channels funnel in fresh air to cool the backing plate, buffing pad, machine, and painted surface
- Reduces wear and tear on the backing plate, buffing pad, and machine
Features:
- Insert DA polisher wrench between the counterweight housing and backing plate.
- Hold the spindle with the wrench and unscrew the backing plate by hand.
- Line up the backing plate spindle thread and screw directly into the DA spindle.
- Make sure the included washer stays in place around the backing plate threads.
- This washer ensures proper clearance between the DA machine housing and the backing plate.
- Continue counter-holding the DA spindle with the wrench and screw backing plate in tightly by hand.
- Test fitment by turning machine by hand and make necessary adjustments if machine binds up.
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.