Performer RPM 350ci / 410HP Engines with Performer RPM Intake
ENGINE OIL: The engine is supplied with Edelbrock Break-In Oil in the crate. Before starting the engine, you will need to prime the oil system. Do not turn the engine over with starter motor for priming. Mark the distributor, as it comes preset on #1 cylinder. Then, remove and use a priming tool to turn the pump shaft.
Change the engine oil no more than 300 miles after break-in. Use of oil with zinc or a zinc additive for the life of your engine is recommended.
Fully Assembled and Ready to Run!
Proven performance right out of the box with high-quality Edelbrock components. Based on new GM short blocks with choice of natural finish (as-cast) or polished manifold and heads. 2 year unlimited mileage warranty (details included with engine).
|Edelbrock E-Street Engine Specifications|
|Torque||408 ft/lbs TQ|
|Block||NEW GM "ZZ" 4-Bolt 1-Piece Rear Main Seal|
|Camshaft||Performer RPM 350-7102|
|Rocker Arms||1.5:1 Roller|
|Intake Manifold||Performer RPM 350-7101 or RPM Air-Gap 350-7501|
|Cylinder Heads||Performer RPM 350-60899|
|Carburetor||800 cfm Thunder AVS 350-1813|
|Water Pump||Without, Short or Long|
|Distributor||MSD Pro Billet|
|Valve Covers||Cast Aluminum|
|Finish||Satin or Polished|
|Break-In Oil||Includes 6 Quarts of Edelbrock SAE30 350-1070|
NOTE: customer must add oil before start-up
|Warranty||Manufacturers 2-Year, Unlimited Mileage|
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.