Items You Need
Satin Finish
ENGINE OIL: The engine is supplied with Edelbrock Break-In Oil in the crate. Before starting the engine, you will need to prime the oil system. Do not turn the engine over with starter motor for priming. Mark the distributor, as it comes preset on #1 cylinder. Then, remove and use a priming tool to turn the pump shaft.
Change the engine oil no more than 300 miles after break-in. Use of oil with zinc or a zinc additive for the life of your engine is recommended.
Specifications:
The Ultimate Muscle Car Engine!
Built on a completely new GM ZZ Small Block Chevy short block, Edelbrock Performer RPM E-Tec engines feature high-quality parts for outstanding performance. Available with cast aluminum, polished or EnduraShine finish intake manifold, cylinder heads, carburetor & valve covers. The Performer RPM E-Tec engines are also available with the Pro-Flo 2 Electronic Fuel Injection System.
Engine Specifications | |
Displacement | 350 cid |
Horsepower | 435 |
Torque | 435 ft.lb |
Compression | 9.5:1 |
Block | NEW "ZZ" 4-Bolt 1-Piece Rear Main Seal |
Crankshaft | Forged Steel |
Pistons | Hypereutectic |
Camshaft | RPM Hydraulic Roller 350-2204 |
Rocker Arms | 1.5:1 Roller |
Intake Manifold | RPM Air-Gap Vortec 350-7516 |
Cylinder Heads | E-Tec 170 350-60975 |
Carburetor | Thunder Series AVS |
Water Pump | Victor Series Aluminum |
Distributor | MSD Pro Billet |
Valve Covers | Cast Aluminum |
Finish | Satin, Polished & EnduraShine |
Break-In Oil | Includes 6 Quarts of Edelbrock SAE30 350-1070 NOTE: customer must add oil before start-up |
Warranty | Manufacturers 2-Year, Unlimited Mileage |
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.