- Fits 1994-1995 V8 applications
- Replacement T-5 bearing retainer with steel throw-out bearing sleeve
- Fits production and Ford Racing T-5 transmissions
Smoother clutch engagement can be yours with one of these Ford Racing T-5 bearing retainers. The steel bearing sleeve and aluminum mounting flange reduce flex for more consistent engagement.
- Replacement T-5 Bearing Retainer w/Steel Throw-Out Sleeve
- Length From Trans. Face To End of Sleeve 5.160 in.
Upgraded Mustang Throw Out Bearing Retainer
Ford Racing Bearing Retainers are designed to replace the original all aluminum retainers used on the factory T-5 transmissions. The Ford Racing retainer uses a steel sleeve instead of the factory aluminum part. The steel throw-out bearing on the aluminum sleeve would cause galling of the bearing on the sleeve. The galling would cause premature clutch, transmission and bearing wear along with causing a transmission to be difficult to shift. If the transmission is out or has to come out 4 bolts is all you need to work with to improve the drivability and life expectancy of your clutch and transmission.
Can you tell me the outside dimension of the base? Not the overall diameter, but the aluminum ring where the black steel tube attaches to the base. Thanks.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.