Top Categories
All Categories

Top Categories

All Categories

Shop By Vehicle
Account Login
Gift Cards
Track Order
HANS Performance Products NAK13044.41S

HANS Performance Products HANS Adjustable SFI 38.1 Certified


Free Shipping
Save $25 off $250, $50 off $500, $100 off $1,000. Promo Code: HORSEPOWER exclusions apply

HANS Performance Products HANS Adjustable SFI 38.1 Certified $546.99
Out of stock
To order this item contact Customer Service at 1-800-345-4545.
HANS Adjustable
  • SFI 38.1 Certified
  • Large
  • Quick Click Anchor Tethers
  • No Helmet Anchors Included
  • HANS Performance Products NAK13044.41S Details

    No Anchor Kit


    Manufacturer's Part Number:

    The Multipurpose Hans Device for the Multipurpose Racer

    The HANS Adjustable enables racers to purchase one HANS device to use in every racing event. Previously, customers ordered a HANS Device in a fixed angle according to the driver's physical size and type of seating position in the car -- such as an upright seat in stock cars or a reclined seat in open-wheel machines. Metal fasteners that employ Spiralock® technology enable a driver to adjust the legs of the HANS to alter the angle of the collar in 5 degree increments from 10 to 40 degrees. The HANS Adjustable is available with a medium or large collar which will fit most every driver. The HANS Adjustable weighs in at 970 grams. This does not make it the lightest HANS Device, but it certainly isn't the heaviest. The HANS Adjustable device is made by an injection molded process using a metal alloy before a fire-resistant nylon coating is applied. The Hans Adjustable will arrive fully assembled and pre-adjusted from the factory. SFI 38.1 Approved. .

  • SFI 38.1 Approved
  • Adjustable from 10 to 40° in 5° Increments
  • Injection-molded Metal Alloy with a Fire-resistant Nylon Coating
  • Full Range Head Movement
  • Lightweight at only 970 grams
  • Available in Medium and Large

    NOTE: This is a high-speed video replayed in slow motion. The elapsed times on the video are marking points for the slow motion replay. Five seconds in this video equate to 100 milliseconds in real time. (An eye blink lasts 400 milliseconds.)

    1-Second Mark: The torso is held in the seat by properly tightened belts. Helmets are properly fastened.

    2-Second Mark: The torso begins to move forward due to belt elongation and compression of the dummy.

    3-Second Mark:
  • (Top) The unrestrained head begins to pitch forward. The elongation of the belts allows the dummy's torso to slide further forward in the seat.
  • (Bottom) The friction rubber on the legs of the HANS has engaged the belts to straighten and load the tethers, enabling the helmet and head to move with the torso. The HANS keeps the head and helmet in normal relationship to the torso despite the elongation of the belts.

    4-Second Mark:
  • (Top) The neck loading increases as the unrestrained head reaches maximum excursion, increasing tension in the neck beyond the threshold for serious or fatal injury.
  • (Bottom) The HANS continues to be held in place by the friction rubber on the legs during the forward movement of the torso. The tethers straighten fully and remain substantially horizontal, keeping the head in normal relationship to the torso.

    5-Second Mark:
  • (Top) Instrumentation in dummy confirms the neck tension threshold for a serious or fatal injury - 4,000 Newtons - has been crossed.
  • (Bottom) The HANS restrains the head and instrumentation in dummy confirms neck tension is kept far below the threshold for serious or fatal injury.

  • Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.


    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.