JAZ Products maintains their own equipment and molds, producing only the highest quality fuels cells. These Pro Sport Fuel Cells come equipped with a 90°, 2-1/4" neck that is 2" in height and a vented twist lock cap with spring loaded flapper. The cells are molded in a seamless cross-linked polyethylene inner shell and have a 20-gauge welded steel container outer shell that is powder coated red or black. Available with or without foam, JAZ only uses the best safety foam on the market, which has up to a 10x longer service lifespan than that of other non-fuel approved foams. All pro sport fuel cells exceed SFI 28.1 and are accepted by most sanctioning organizations.
- Seamless cross-linked polyethylene inner shell
- 20-gauge welded steel container outer shell
- Red or black powder coat
- 90° filler neck, 2-1/4" neck diameter, 2" height
- Vented twist lock cap with spring loaded flapper
- Available with or without aviation safety foam
- One mil spec anodized AN-8 fuel pickup fitting
- One mil spec anodized AN-8 tip over valve vent fitting
- Pickup hose routed to right rear corner
Note: Although these fuel cells exceed SFI 28.1, only fuel cells labeled with SFI certification are actually certified. Only fuel cells that are specifically designed for classes that require SFI certification receive a serial number and SFI label. (Additional charges apply for SFI serial number and label.)
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.