5-Gallon - 12 in. L x 12 in. W x 8 in. H
Note: Alcohol, Methanol, and Ethanol fuels will work with the safety foam in this fuel cell, although the water content in these fuels may cause foam to deteriorate at a faster rate than normal. It is recommended to install a reusable fuel filter and inspect it before every event to be sure there is no contaminants obstructing your fuel flow.
- Tig-welded 5052 Lightweight Aircraft Aluminum
- Safety Foam Inside to Keep Fuel from Sloshing
- Plastic Flush Mount Fill Cap with 2.875 in. Opening
- Two -8 AN Male Fuel Pickup Fittings Welded to the Lower Sump
- -8 AN Male Fuel Return Fitting Welded to the Top Panel
- -8 AN Male Rollover Vent Fitting Welded to the Top Panel
- Fuel cells are not street legal or D.O.T. approved
- Mounting Brackets not included and can be purchased separately. Use JEGS 555-15520
Fuel Cells to Amplify Performance and Safety
JEGS Aluminum Fuel Cells are equipped with durable TIG-welded aluminum tanks (wall thickness of 0.090 in.), foam (advanced fuel aeration), and a flush-mount, aircraft-type cap to provide complete fuel containment (billet aluminum cap sold separately). These lightweight Fuel Cells include male AN outlets, a vent, and are available with a natural, polished, or oil/fuel-resistant black powder-coat finish.
JEGS Rollover Vent Valves are made from lightweight aluminum and designed with a one-way check valve that allows air to flow through the vent line under normal operating conditions, and in the event of a rollover, the valve closes off the vent line keeping fuel in the cell and not allowing it to spill over. These valves are available in internal and external mount applications and in AN sizes of -6 AN, -8 AN, and -10 AN. Rollover valves are mandatory for many sanctioned racing organizations for safety precautions. Please consult your rules book or safety crew.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.