15-Gallon Fuel Cell - 18 in. L x 20 in. W x 9 in. H
Amplify the performance and safety of your vehicle with this 15-gallon JEGS Fuel Cell with Sending Unit. Purpose-built for racing, the cell has a lightweight TIG-welded aluminum tank, foam, and a flush-mount cap. Additional features include a 0-90 Ohm fuel level sender, -10 AN fittings (either 10 AN fitting on top of the cell can be used as a return or vent), and a black powder-coat finish — JEGS helps your vehicle reach its full potential, without breaking the bank!
Please note that the current foam in this cell is only compatible with gasoline-based fuels and must be removed when using Alcohol, Methanol, and E-85 fuels since the water content in alcohol-based fuels may cause the foam to break down. Also, this cell does not have a roll-over valve; if required, an external roll-over valve will need to be purchased separately. We recommend JEGS -10 AN external mount valve 555-15379
Fuel Cells to Amplify Performance and Safety
JEGS Aluminum Fuel Cells are equipped with durable TIG-welded aluminum tanks (wall thickness of 0.090 in.), foam (advanced fuel aeration), and a flush-mount, aircraft-type cap to provide complete fuel containment (billet aluminum cap sold separately). These lightweight Fuel Cells include male AN outlets, a vent, and are available with a natural, polished, or oil/fuel-resistant black powder-coat finish.
JEGS Rollover Vent Valves are made from lightweight aluminum and designed with a one-way check valve that allows air to flow through the vent line under normal operating conditions, and in the event of a rollover, the valve closes off the vent line keeping fuel in the cell and not allowing it to spill over. These valves are available in internal and external mount applications and in AN sizes of -6 AN, -8 AN, and -10 AN. Rollover valves are mandatory for many sanctioned racing organizations for safety precautions. Please consult your rules book or safety crew.
from front (Ftg side) to back (sender side) is this cell 18" or 20"
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.