- (1) 25' Coil of 3/16" Steel Brake Line
- (4) DOT Approved Front Brake Lines -03AN Straight to 3/8"-24 IFF Swivel 18" Long
- (4) Brake Line Weld Tabs
- (4) Brake Line Clips
- (2) 3/8"-24 Inverted Flare Female Tees
- (2) 1/8" NPT to 3/8"-24 Inverted Flare Female Fittings
- (2) 9/16"-18 Tube Nuts
- (2) 1/2"-20 Tube Nuts
- (2) 7/16"-24 Tube Nuts
- (20) 3/8"-24 Tube Nuts
JEGS universal brake line kit includes the parts needed to install new brake lines with DOT braided stainless brake hoses on most vehicles. Detailed instruction sheet shows the recommended line routing for vehicles with a traditional rear axle or independent rear suspension. Uses 45° inverted double flare on the hard lines.
The DOT Brake hoses have a special clear PVC cover that makes them easier to clean and prevents paint scuffing. These DOT lines connect directly to 3/16" hard lines (3/8"-24 inverted flare thread) without any extra adapters for a simple installation, this reduces the potential for fluid leaks with fewer components.
Order caliper or wheel cylinders adapters separately (use -03AN caliper adapters with the correct size thread to work with your calipers & wheel cylinders). This kit includes adapters to fit most common master cylinders.
Choose from a 3-Line or 4-Line kit.
Optional EZ Kits include the hydraulic brake light switch with tee & pigtail, or brake light switch & adjustable proportioning valve.JEGS EZ Kits are designed by JEGS professionals to ensure that you get all the correct parts you need.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.