JEGS 72330 Rust Preventative Coating is a high solids coating designed to stop rust and corrosion from spreading. This single-component coating protects the surface from water, salt, chemicals, and other corrosive contaminants and can be applied over properly prepared rust and dries to a flexible, non-porous surface that will not crack, chip, flake, or peel. For applications exposed to UV light, it must be top-coated with an industrial topcoat and is V.O.C. compliant in North America.
Features of JEGS Rust Preventative:
- Can Be Brushed or Sprayed on Directly Over Properly Treated Rust
- Starves Rust from Moisture & Oxygen to Prevent Spreading
- Significantly Extends the Life of Rusted Metal
- Can Be Used as a Topcoat if Not Exposed to UV Rays
- Allows You to Apply Paint as a Topcoat Over Rusted Metal
- Can be recoated after 3-8 Hrs depending on temperature and humidity
- Can be Top Coated after 24 Hr Drying Time
- Rust Preventive Coating should not be applied when temperatures are below (50 degrees F/10 degrees C)
- For Best Results, it is Recommend to Apply this Coating at 72 degrees F or above
Note: Surfaces treated with JEGS Rust Preventative must be coated with an industrial topcoat for protection from UV light. It is recommended to read the Technical Data Sheet before applying this product. Click on the Blue Technical Data Sheet Link Above.
Stop the Spread of Rust
Save the expense of replacing rusty parts. Use JEGS Rust Preventative to cover rust and stop corrosion. This rust preventive coating can be sprayed or brushed on for protection from water, salt, chemicals, and other corrosive contaminants. Apply the inhibitor over prepped rusty surfaces then allow to cure for a flexible, non-porous finish that will never crack, chip, flake, or peel.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.