Head Bolt Washers
JEGS Head Bolt Washers are machined from 4130 chromemoly steel, heat treated for durability and black oxide coated. Double disc ground to insure parallel surfaces for accurate torque readings and minimize the chance of galling your expensive cylinder heads with the bolt head. Features a chamfered side for the large radii from the shank to underside of the bolt head. Fits 7/16" head bolts common to Small Block/Big Block Chevy and Small Block Ford 289-302/5.0L. Made in the USA.
Note: an edge may need to be trimmed (or clipped) for use with large diameter valve springs.
JEGS Premium head bolts are available with a reduced hex size (1/2" compared to stock 5/8") with a wide area head flange that eliminates valve train removal to aid in re-torquing of the cylinder heads. All High Performance Series bolts are 170,000 psi chromemoly alloy steel, which is approximately 15% stronger than Grade 8. Each bolt is then finished with the distinctive JEGS J-Crown. Kits come complete with hardened double disc ground and chamfered 4130 heat-treated steel washers (also available separately). Head bolts and washers are coated with black oxide for durability. Bolts sold in complete engine sets. .
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.