Quadrajet Bushing Kit
- Eliminates common vacuum leak problems
- More consistent idle speeds
- Gets rid of binding or sticking throttle
- (1) Reamer
- (4) Screws
- (16) Bronze Bushings
From the best tuners in the industry come modified Quadrajet carburetors from JET Performance to match your specific performance needs.
Streetmaster Rochester Quadrajet 4-bbl
STAGE 1 - Disassembled, cleaned and inspected to restore factory stock performance. Casting plugs are sealed with epoxy to prevent leak-down. All of the circuits are checked for proper sizing and the calibration is checked for proper jets, primary metering rods and secondary metering rods. Quadrajet Carb is reassembled with new float, choke pull-off and bronze bushed throttle shafts.
STAGE 2 - All features of Stage 1 carbs plus fully recalibrated idle, off idle, main, accelerator pump and high speed circuits. Provides improved idle quality, instant throttle response and maximum torque and hp.
STAGE 3 - For serious street-strip and race applications such as circle/oval track and NHRA Stock and Super Stock classes. Fully modified Quadrajet with oversized .149 needle and seat assembly. Main well size is increased and balanced to assure proper top end, high RPM fuel flow. Extensive circuit modifications are performed to keep the fuel curve correct throughout the RPM range, clean idle quality, and instant off the line response.
JEGS EZ Kits are designed by JEGS professionals to ensure that you get all the correct parts you need.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.