0
0
×
's Account
1-800-345-4545
Gift Cards
Track Order
Help Center

Lunati BareBones Hydraulic Roller Camshaft Complete Kit Chevy Small Block 1987-Present, & LT4 Lift: .507" /.507"

638-20080131K

made in usa

Product Q&A
View Now
Click image to zoom
BareBones Hydraulic Roller Camshaft Complete Kit Chevy Small Block 1987-Present, & LT4 Lift: .507" /.507"
$776.95
BareBones Hydraulic Roller Camshaft Complete Kit
Chevy Small Block 1987-Present, & LT4
  • Lift: .507''/.507''
  • Duration: 278 Deg / 288 Deg
  • LSA: 112 Deg
  • RPM Range: 2000-6400
  • Free Shipping -
    This product is not available, please call customer service for options, at 1-800-345-4545.

    Will anything have to be changed to put this in a non vented opti 93 lt1 

    Asked by: Anonymous
    The Lunati 638-20080131K cam will fit a '93 LT1.
    Answered by: jshook
    Date published: 2024-05-08

    Hey, I have a 96 lt1 stock engine will this set up work on my engine?

    Asked by: Jaja
    The Lunati 638-20080131K cam kit will work with a '96 LT1 engine.
    Answered by: jshook
    Date published: 2023-10-23

    I have a 1966 Small journal 327 SBC with edelbrock RPM performer heads. Will this roller kit work?

    Asked by: Nick89
    The Lunati 638-20080131K cam kit does not fit a '66 327.
    Answered by: jshook
    Date published: 2023-02-02

    What is the minimum stall conver that can be used with this cam

    Asked by: Jdg199999
    Lunati 638-20080131K minimum stall recommended 2200-2500 rpm
    Answered by: langus
    Date published: 2022-08-26

    Will the stock pushrods work or do I need to measure for new ones after install?

    Asked by: Walker88
    The Lunati 638-20080131K cam kit will use stock, roller pushrods.
    Answered by: jshook
    Date published: 2022-08-12

    I have a 5.7 from a 92 iroc z with a carb and about to put on vortec heads. Will this kit fit or do I not need all of this?

    Asked by: Sm92784
    This kit will work with your engine.
    Answered by: Rusty B
    Date published: 2018-10-10

    I have a 2010 Camaro ss 6.2L will this fit my motor?

    Asked by: Jackal77
    No, this is not the correct cam kit for your engine.
    Answered by: Rusty B
    Date published: 2018-08-27

    Have a stock 350 been bored .030 over with flat top pistons. Has stock vortec heads. Would this setup function good with my motor. Turbo 350 2500 stall

    Asked by: Trent duke
    Yes, this will work well with your engine.
    Answered by: Rusty B
    Date published: 2018-06-12
    • y_2024, m_5, d_26, h_3CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_8
    • loc_en_US, sid_10001_10001_2008475, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    Recently Viewed

    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.

    Tools:

    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.