Unrivaled Customer Service
And Expert Tech Advice!  
Same Day Shipping Before 11 PM ET
My Cart
Shop By Vehicle
Shop By
Close Menu
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates

Moroso External Heating Pad Dimensions: 5" x 7"

Moroso 23996


made in usa
jegs shipping
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Moroso External Heating Pad Dimensions: 5" x 7" $59.99
External Heating Pad
  • Dimensions: 5" x 7"
  • Self Adhesive Attachment
  • 400 Watts
  • 110 Volt Cord

  • Moroso 23996 Details

    Self Adhesive Style Heating Pads

    New and improved lamination process, this is excellent for pre-heating of oil pans, tanks and automatic transmission pans. Pad is secured to unit by self-adhesive attachment. The etched foil design distributes heat evenly. Superior grade silicone outer shell resist oil and dirt. Heats oil from 66°F to 160°F in only 25 minutes. Comes with 36" power cord. Has 400 watts (minimum) of power.


    Width (in.)
    Overall Length (in.)
    Cord Length (in.)
    Oil Preheater Attachment
    Oil Preheater Style
    External pad
    Power Supply
    110/120 V
    Sold as a kit
    400.0 watts
    Manufacturer's Part Number:

    These external heating pads are excellent for pre-heating oil pans, tanks and automatic transmission pans. Available in a hook/spring attachment style or self adhesive design. The superior grade silicone outer shell resists oil and dirt.

    Installing Self-Adhesive Heating Pads
    Moroso Self-Adhesive Heating Pads come in two different sizes, making them convenient to use on dry sump tanks or oil pans to pre-heat oil prior to racing. A few installation tips will insure maximum heat transfer and years of dependable service.

  • 1) Mark the location that the pad will be applied to, and prepare the surface so it's free from paint, grease, oil and large dents.
  • 2) Before applying the pad, decide where you want the power cord to go. Remove the protective backing from the pad and avoid touching the adhesive surface.
  • 3) Begin with the side opposite the power cord, applying pressure with your hand while forming it to the surface. Press the pad into any surface impressions as you go. If wrinkles occur, press them out as flat as possible.
  • 4) Apply a high-temperature silicone sealant/adhesive around the entire perimeter of the pad.
  • 5) Allow the sealant/adhesive to cure per manufactures instructions before using the heater.
  • 6) Circulating oil through the system while using the heater speeds the heating process.

  • 23996 - Moroso Heating Pads is rated 3.7 out of 5 by 3.
    Rated 5 out of 5 by from HAD WHAT I NEEDED Grand kids were over and it came up missing still haven't located it. will have to purchase another one
    Date published: 2018-01-08
    Rated 5 out of 5 by from Saves on methanol I bought this Moroso heating pad to preheat my engine and keep my alcohol injected motor warm between rounds works great and saves on fuel
    Date published: 2017-06-09
    Rated 1 out of 5 by from it sounded good but not worth the money worked 1 time and quit it was a lot of work to find a spot that was big enough for this to stick to it was a total waste of my time
    Date published: 2018-01-11
    • y_2018, m_8, d_18, h_18
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_3
    • loc_en_US, sid_10001_10001_21428, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs
    Items You Need
    Some parts are not legal for use in California or other states with similar laws / regulations