Accurate ignition timing is one of the most vital adjustments you can make to your engine. Proper timing can mean the difference between winning and losing a race or even blowing an engine (as a worst-case scenario). Speedmaster Timing Tapes help you to recognize the importance of timing. They come with eight different tapes to fit common balancers ranging from 5.25 in. to 8 in. in diameter. These tapes are marked off in one-degree increments from 14 degrees ATDC to 64 degrees BTDC and are printed on tough, chemical-resistant material. Not only do the Speedmaster Timing Tapes help you get an exact timing setting, they allow you to see exactly where the Total timing is set. Remember, the Total timing is just as critical, if not more, than the initial timing, and the Speedmaster Timing Tape will help you ensure that it is set accurately.
Protect Your Engine from Harsh Vibrations
Speedmaster Harmonic Dampers feature a strong bonding process which adheres the elastomer to the inside diameter of the steel inertia ring and the outside diameter of the hub for an improved elastomer. Also featured are clear, white, easy-to-read timing marks with a black background. At any frequency and RPM, the inertia ring harmonically rotates with the engine and absorbs the torsion vibration from the rotating assembly. This process extends crankshaft and bearing life for increased engine power and torque.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.