Trail Gear 300686-KIT Suspension Kit, Trail-Link, Rear (3 Link Tacoma 1995-2004)
542-300686-KIT
Trail-Gear 300686-KIT Features:
You asked for it and we delivered! Trail-Gear is now offering a 3-Link suspension kit for the rear of your 1995-2004 Tacoma. Every Tacoma component in this kit has been engineered for maximum durability and tested using the most advanced engineering technology in the industry. With our full color, in-depth installation instructions, anyone with minimal mechanical and welding skills can install this kit in one or two weekends.
The Tacoma 3-Link Rear Suspension Kit consists of a 3 link system plus a panhard rod to locate the axle. This system allows the use of the stock fuel tank. Links are made from super heavy duty 2" DOM with a wall thickness of 1/4". Extra large 1.25" Creeper Joints are used for the link ends. This kit with long travel shocks allows for more then 30" of rear axle articulation. Kit does not include rear wheel spacers, shocks or upper shock mounts. Recommended shocks, 16" Fox 2.0 Air shocks. Kit weight 140 lbs.
This kit works great with our air shock hoop mounting kit.
Kit Includes:
- (2) 40", 2"OD X .250" wall DOM links
- (2) 30", 2"OD X .250" wall DOM links
- (8) 1.25" Creeper Joints
- (8) Rod end jam nuts
- (8) threaded link end bungs
- (1) Upper link frame mount
- (2) Lower link frame mounts
- (8) Lower link frame gussets
- (1) Panhard frame mount
- (1) Panhard/upper link axle mount w/ 2 gussets
- (2) Frame support tubes
- (8) 9/16" X 4" link end bolts and lock washers
- (2) Tacoma rear frame box plates and tubes
- (1) Panhard reinforcement tube
- The Panhard is 1.25” x .250” wall DOM material
- Link material is 2" x .250" wall DOM tubing
- Rod ends are 1.25" Creeper Joints
- The Panhard bracket on the axle is 3/16”
- Brackets are 1/4” steel, formed and welded
- Kit includes all necessary link hardware except for upper shock mounts
Fits:
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.