- Engines & Components
- Engine - Assembled / Ready-to-Run
- Chevrolet Performance ZZ427/480 427ci/480HP Connect & Cruise Manual Transmission Powertrain System
The Classic L88 427 Big-Block and a Stick Shift!
When it comes to performance innovations that save time, money and guesswork, Chevrolet Performance once again leads the way!
Chevrolet Performance pioneered the concept of crate engines more than four decades ago, and continues to lead the industry with their unprecedented Connect & Cruise crate powertrain systems - factory-engineered engine and transmission combinations that include all the key components.
Show More
Chevrolet Performance engineers matched the engines and transmissions for optimal performance and durability, so you can wring out every horsepower from them with total confidence! Designed for retrofit installations in older vehicles, for easier and quicker installation and operation without the need for guessing which parts will work with your combination.
The convenience of a crate engine, the assurance of factory validate performance and the value of an inclusive package - that's what you get with Chevrolet Performance's Connect & Cruise crate powertrain systems.
Each kit delivers a fully assembled crate engine, transmission and the installation kit to get it all running in your project vehicle - including the flywheel, clutch disc, pressure plate, hydraulic throw-out bearing (lines and master cylinder not included), fasteners and instruction sheets. Chevrolet Performance engineers matched the engines with their respective transmissions, ensuring they are up to the task of channeling big power with absolute dependability.
The engineers did all the hard work of designing and calibrating perfectly matched powertrain systems - and they covered them with a 24-month/50,000-mile limited warranty.
ZZ427 427ci, 480HP / 490TQ Engine
Between 1967 and 1969, the legendary L88 was the ultimate expression of Chevy's Big-Block power, combining a rigid iron cylinder block with lightweight aluminum cylinder heads and a single four-barrel carburetor. That raspy rat engine was rated at 480 horsepower, although the figure was generally thought to be on the conservative side. It powered some of the most storied cars in high-performance history.
Chevrolet Performance has recreated that classic Big-Block combination in the Z427/480 - including the 480 horsepower rating (and it just might be a little on the conservative side, too). Like the original, it features a forged steel crankshaft and high-flow, oval-port aluminum cylinder heads. They upgraded the camshaft from the original's mechanical flat-tappet design to a smoother hydraulic roller, which delivers great drivability characteristics and a broader rev range. A 10.1:1 compression ratio means it will perform great on pump gas, too. The engine's top half is the same as the Limited Edition Anniversary 427; the intake is a matching high-flow oval port aluminum piece. With 490 ft/lbs torque and a conservative 480 HP rating, this is still one of the best crate engines for nearly any big block application!
Whether you're building a '69 COPO Camaro resto-mod tribute, a modified mid-year Corvette, or a street-tire class winner, the ZZ427/480 is the heritage-inspired crate engine that delivers the performance that built the Big-Block's legendary reputation.
Specifications:
- Horsepower: 480 @ 5800 RPM
- Torque: 490 ft/lbs @ 3800 RPM
- Block: Cast Iron with 4-Bolt Main Caps
- Crankshaft: Forged Steel
- Connecting Rods: Forged Steel
- Pistons: Forged Aluminum
- Camshaft: Hydraulic Roller
- Cylinder Heads: Aluminum Oval Port, 110cc Combustion Chamber
- Balanced: Internal
- Compression Ratio: 10.1:1
- Rocker Arms: 1.7:1 Aluminum Roller Style
- Water Pump: Aluminum Short-style
- Recommended Fuel: 92 Octane
T56 Super Magnum Six-Speed Manual Transmission
The Chevrolet Performance T56 Super Magnum Six-Speed Manual Transmission is a high-torque capacity TREMEC six-speed manual. Specially designed for custom, retro-fit installations with Chevrolet Performance crate engines. The exterior case similar to fourth-generation F-body transmission with the stronger, high-capacity gear sets, input shaft and output shaft used in the TREMEC TR6060. It also features a 40-tooth reluctor ring that's necessary for use with electronic vehicle speed sensors used with Chevrolet Performance controllers.
Features:
- 700 lb.-ft. Maximum Torque Capacity
- 26-Spline Input Shaft
- 31-Spline Output Shaft
- Gear Ratios: 2.66 (1), 1.78 (2), 1.30 (3), 1.00 (4), 0.80 (5), 0.63 (6)
- Slip-Yoke Design
- Two-Position Shifter Plate Included, With Third Position Built Into The Transmission
ZZ427 / T56 Super Magnum Installation Kit
Get your new T56 Magnum bolted to your new engine with this T56 Super Magnum installation kit. Kit includes all the correct components that Chevrolet Performance offers to easily mate your new engine and trans.
Installation Kit Includes:
- Super Magnum Bell Housing Kit
- Hydraulic Throw-out Bearing
- Clutch Actuator to Trans Bolts
- Bell Housing to Trans Bolts
- Flywheel
- Flywheel to Crankshaft Bolts
- Clutch Disc & Pressure Plate Set
- Crankshaft Pilot Bearing
- Instruction Sheet
- Rated for 800 ft/lbs of torque
- Does not include clutch master cylinder and lines
Each Crate Powertrain System Includes:
- Fully assembled crate engine
- Transmission & Install Kit
- Instruction sheet