Magnaflow Pre OBD-II 49-State & Canada Spun Catalytic Converters

Choosing the Correct Catalytic Converter

1. Determine engine size and vehicle weight (there are legal limit regulations).

2. Determine the type of catalytic converter being replaced:

• Pre OBD-II converters are for vehicles built before 1996.
• OBD-II converters must be used on vehicles built in 1996-Up.

3. If the engine has been changed and is not the same model year as the chassis, proceed as follows:

• For engines older than the chassis, select the converter based on the chassis model year.
• For engines newer than the chassis, select the converter according to the engine requirement.

4. It is necessary to know which type of catalytic converter was originally used on the vehicle: 2-Way, 3-Way, or 3-Way + Air. Required by the EPA, this information (abbreviations listed below) is on the vehicle emission control label in the engine compartment. The label should be visible on the firewall, hood's underside, radiator support, fan shroud, or shock tower.

• 2-Way (Oxidation) = OC or COC
• 3-Way (Oxidation Reduction) = TWC or ORC
• 3-Way + Air (3-Way plus Oxidation) = TWC/OC or ORC/OC

Note: 49-State Catalytic Converters are not legal for sale, installation, or use on licensed vehicles in the state of California.