SPC Ford 4WD Caster/Camber Sleeves

Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve p/n 827-23109 to determine the change needed, then install the correct sleeve. To adjust, the sleeve may be lifted and rotated 1/8 turn. 1 sleeve is required per wheel. Sold individually.

Applications:

• 1980 and up: F250/F350/E250/E350/E450/Full Size Bronco with Ball Joints
• 1980-96 F150/250 (L/D)