Advance Adapters 50-2700 Features:
- The Ford NP435 & T18 adapter the Bronco Dana 20 is 7.50 in.� in length. The adapter material is 356 T-6 heat treated aluminum alloy, and the adapter has a provision to retain the original early Bronco mount. The adapter kit includes an adapter housing, alignment retainer, snap ring, gaskets, seal, o-ring, fastening hardware and adapter instructions.
- Transfer Case
- The adapter assembly will fit any 1966-77 Bronco Dana 20 transfer case. This adapter will only work with the in.T in.� style shifter. Transfer cases with a in.J in.� style linkage will require modifications to retain this linkage.
- Transmission
- The kit is designed for exclusive use with the Ford NP435 & T18 4 speed transmissions, 2wd version with a 28 spline output shaft. The NP435 cast iron case length is 10.875 in.� and has a aluminum top cover. It was used in Ford trucks from 1964-85. When using our adapter kit with the NP435 & replacing a 3 speed manual in a V8 early Bronco application, the transmission conversion will not require any driveline modifications.
- The Ford T18 cast iron case length is 11.875 in.� and has a cast iron top cover. It was used in Ford trucks from 1967-84. The T18 is 1 in.� longer than the NP435, requiring new drive shafts.
- These truck transmissions are a very popular choice for the early Bronco drivetrain. The kit includes an adapter housing, alignment retainer, seals and gaskets. The kit utilizes the stock transmission 2WD output shaft (28 spline), and the stock Bronco spud shaft. The adapter housing is drilled for both the 2WD NP435 & T18 transmissions. Both transmissions will require some floorboard modifications to allow proper floorboard clearance. A sheet metal shop can fabricate a new tunnel coverplate to accommodate for this larger transmission. The stock shifter handle will most likely need to be modified.
- ADAPTER- NP435 TO BRONCO / 51-1400
- RETAINER- D20 BEARING FOR BRONCO / 716223
- SNAP RING / 716455
- GASKET (NP435)(T18) / 716512
- BRONCO TRANSFER CASE GSKT / 716513
- SEAL (BRONCO RETAINER) / 716713
- O-RING BRONCO INDEX RETAINER / 716714
- NUT 3/8 -16 PLATED GRD 5 / 723701
- LOCK WASHER 3/8 ZINC / 723704
- STUD BOLT 3/8 -16 X 2 LG B7 / 723711
- HEX NUT 1/2 -13 PLATED / 725004
- S.H.C.S. 1/2 -13 X 1-1/2 / 725016
- STUD BOLT 1/2 -13 x 2 / 725040
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.