Ford Mustang
Complete System Includes:
- 1 ea P/N 18690 Cobra-Top Stealth Fuel Tank
- 1 ea P/N 18679 A1000 Stealth Fuel Pump
- 1 ea P/N 16301 fuel pump wiring kitv
- 1 ea 3ft length of 10-ga. Black wire
- 1 ea 25ft length of 10-ga. Red wire
- 1 ea 30-amp circuit breaker
- 1 ea 30-amp automotive relay
- 2 ea blue female blade connector
- 2 ea yellow female blade connector
- 5 ea yellow #10 stud ring connector
- 1 ea yellow 3/8” stud ring connector
- 6 ea tie-wraps
- 26 ft AN-06 stainless steel braided line
- 16 ft AN-08 stainless steel braided line
- 6 ea P/N 15650 AN-06 straight hose-end
- 1 ea P/N 15651 AN-06 45-degree hose-end
- 5 ea P/N 15652 AN-06 90-degree hose-end
- 2 ea P/N 15653 AN-08 straight hose-end
- 2 ea P/N 15655 AN-08 90-degree hose-end
- 1 ea P/N 12301 Filter 10-Micron Paper
- 1 ea P/N 13109 A1000-06 Fuel Pressure Regulator
- 1 ea P/N 14101 Ford 5.0L Billet Fuel Rails
- 1 ea P/N 15673 AN-08 to 2-AN-06 Y-block
- 2 ea ¼” flat washers
- 2 ea ¼-20 nyloc nuts
- 2 ea ¼-20 x 1” carriage bolts
- 12 ea tie-wraps
- 3 ea AN-06 o-ring
- 6 ea AN-08 o-ring
- 2 ea AN-10 o-ring
- 1 ea P/N 15602 AN-06 male/male flare union
- 5 ea P/N 15605 ORB-08 to AN-06 male flare
- 3 ea P/N 15606 ORB-06 to AN-06 male flare
- 1 ea P/N 15607 ORB-08 to AN-08 male flare
- 2 ea P/N 15610 ORB-10 to AN-08 male flare
- 12 ea cushioned clamps
- 12 ea self drilling screws
- 1 ea P/N 12305 2” billet filter bracket
- 1 ea P/N 15633 0-100psi fuel pressure gauge
In 2003. Ford developed a specific tank for the 03 and 04 Mustang Cobras. This tank looked like a normal tank from the outside, but featured one of the finest internal baffling systems weve seen from an OE tank to date. In late 2011, Ford decided to discontinue these tanks. At Aeromotive, we saw an opportunity to reproduce these tanks. Not only can we offer reproduction 03-04 Cobra tanks, but we can also modify the tooling in the production process to offer this same tank to fit all Fox Body Mustangs. And that is exactly what we did. But we took it one step further. We built specific A1000 and Eliminator Fuel Pumps that bolt right into top of these tanks. Then, we built a complete system to make it one part number that gives you everything you could possibly need to install a complete Aeromotive Fuel System into your Fox Body. These Fox Body Stealth tanks give you the best performance possible from a stock appearing tank, and our proven A1000 or Eliminator fuel pumps built right into the tank. Choose from either pump and you can now bolt in a fuel tank into your Fox that appears stock, but features an innovative baffling system, a built in fuel pump capable of supporting almost any HP demand and a pre-pump filter. These tanks and systems are a direct bolt-in for 1986 to 1998 Ford Mustangs. Although the Fox Body began in 1979 and carried all the way through 2004, some modifications are necessary for these system to be direct bolt-ins. See notes below on year specifications. Built-in A1000 Fuel Pump. 100-Micron Stainless Steel Pre Filter. (1) ORB-08 Outlet Port & (1) ORB-08 Return Port. Bolts right into factory location using factory tank straps. P/N 13109 EFI Bypass Regulator.P/N 12301 10-Micron Post Pump Filter. P/N 12305 2 Billet Filter Bracket.P/N 14101 86-95 5.0L GT & Cobra Fuel Rail Kit. Complete Fuel Pump Wiring Kit. All of the necessary port fittings.
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.