Ford Racing clutch kits are set up to give you more capacity. They can handle 40 to 50 percent (or more) greater torque than the stock units. Their pressure plates are made from nodular iron, their clutch discs have a sprung hub for shock absorption and smooth operation, and they are made slightly thinner for quicker release. Heavy duty diaphragm type clutch assembly with approximately 40 % more capacity than stock Mustang clutch. OK to mix and match Ford Racing clutch discs and pressure plates but do NOT install a FRPP pressure plate with a stock disc or vice-versa as disengagement problems may occur. Metric fasteners and dowel pins must be used with 10.5" clutches M-6397-A302 . Also recommended Roller Pilot Bearing M-7600-A or M-7600-B.
Ford Performance ClutchFord Racing has designed their clutches for Mustang owners that ride their pony harder than what the factory clutch was designed for. If you are running all the popular bolt-on go fast parts and going drag racing or attending track day sessions with sticky tires you may need more hold than what the factory clutch can offer. Designed to handle 25%-40% more torque than stock clutches and providing the reliability and quality you have come to expect from Ford. Ford Racing clutches are one of the best choices in replacement clutches for the money. Features
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.