Center-Hung Wedge Style Circle Track Floats
Holley floats are designed for Holley 2-bbl and 4-bbl performance carburetors. The floats are named after their attachment point in the float bowl and are available in a center-hung design or side-hung design. The materiel they are constructed of can be either brass or nitrophyl (plastic polymer) depending on the fuel type that is to be used.
A center-hung float has its float arm attached to the float center and is hung/pivots from the center of the float bowl. Center-hung floats are also available with notches for jet extensions to pick-up fuel during extreme g-forces. The notched floats are available in nitrophyl only and can be purchased with or without the jet extensions. Special wedge shaped floats are also available for circle track applications in the center-hung style.
A side-hung float has its float arm attached at one side and is hung/pivots from the side of the float bowl. Side-hung floats are the only style to feature a non-adjustable version as all other floats are adjustable.
The floats constructed of brass are designed for use with alcohol or methanol fuels. The nitrophyl floats are the most common as they are used with gasoline in naturally aspirated and blow-through forced induction systems. A draw-through forced induction system can use either construction depending on the fuel used.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.