Kia
Injen Technology SP1350P Features:
The Kia Stinger has taken the world by storm w/ its balance of sports car feel w/ the added benefit of extreme comfort while on the open road. Injen Technology has taken the new 2018-2022 Kia Stinger equipped w/ the 3.3L Turbo engine deep into our R&D lab to extract the hidden power potential inside the engine and what we have come up is nothing short of amazing.
The OE intake tract is very restrictive from the factory and limiting power output by choking the turbo. Our new SP1350 dual ram horn cold air intake opens that intake tract w/ large, stepped aluminum intake tubes that allows that turbo and engine to breathe deep, while keeping intake velocity up to produce the power that you have been craving.
The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open your Kia Stinger and let that turbo spool. The soul of this intake is found w/in 6061-T6 aluminum air intake tube that provides; smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along w/ clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that; safe Air fuel (A/F) ratio has been maintained throughout the power band.
Additionally, the SP1350 dual intake system includes; fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that is not enough, the Injen SP performance intake provides power you can hear and feel! On our dyno, the SP1350 dual intake system put down an impressive 21 additional horsepower and 18 pound-feet of tire-scorching torque!
This intake provides an aggressive and throaty tone that is unmatched in the aftermarket and one that you will enjoy every time you smash the accelerator! Want to add that personalized touch to your intake? You are in luck, as Injen also offers this intake system in three amazing finishes, SP1350WB (Wrinkle Black), SP1350WR (Wrinkle Red), and SP1350P (Polished Finish).
- Dyno Proven gains of up to 21 hp and 18 lb-ft. of torque
- Short Ram Air Intake Design
- Stepped from 3.00in to 2.50in to 2.25 in. 6061-T6 aluminum intake tubing
- Features Injen's patented MegaRam (MR) Technology
- Provides power gains while maintaining A/F ratios
- No additional tuning required
- Dual 6061-T6 aluminum intake tubing
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter part number X-1078-BB
- Optional hydroshield part number 1120BLK
- Available in three amazing finishes: SP1350WB (Wrinkle Black), SP1350WR (Wrinkle Red), and SP1350P (Polished Finish)
- Aggressive engine tone under full throttle
- Smooth intake piping eliminates restrictions and improves airflow
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered w/ the California Department of Motor Vehicles.
- Black Hydroshield (Optional): N/A
- Filter Color: Blue
- Filter Media: Dry SuperNano-Web
- Grade Type: Performance
- Heat Shield Included: No
- HP Gain: 21
- Intake Color: Polished
- Mounting Hardware Included: Yes
- Patented MR Technology Incorporated: Yes
- Red Hydroshield (Optional): N/A
- Replacement Filter Part Number: X-1078-BB
- TQ Gain: 18
- Tube Material: T6-6061 Mandrel-bent aluminum intake tubing
- Universal or Specific Fit: Specific
Emissions Notes:
This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles, on engines that have been transplanted or swapped into uncontrolled or pre-pollution controlled vehicles, & vehicles used solely for the purposes of closed competition racing.
The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:
- 1965 and older U.S. manufactured California Certified vehicles
- 1967 and older U.S. manufactured Federally Certified vehicles
- 1967 and older Foreign manufactured vehicle
- Racing Use Only Vehicles are those vehicles that are used exclusively for competition that are not registered, will never become registered, and will never be used on streets or highways.
- 1966 and newer U.S. manufactured California Certified vehicles
- 1968 and newer U.S. manufactured Federally Certified vehicles
- 1968 and newer Foreign manufactured vehicle
The following vehicles are considered Racing Use Only Vehicles:
WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
The following vehicles are considered Emissions Controlled Vehicles:
*Installation of parts which are not CARB approved on a pollution-controlled vehicle in the State of California, or in any state that has adopted CARB emissions standards, may result in the Department or Bureau of Motor Vehicles (DMV or BMV) revoking the vehicle registration and certificate of ownership (title), refusing the transfer of registration, and/or the vehicle failing smog inspection. Law enforcement may cite you for the use of an illegal aftermarket part and seize your title and license plate.*
**States that have adopted some or all of the CARB emissions standards include California, Colorado, Connecticut, Delaware, Maine, Maryland, Massachusetts, New Jersey, New Mexico, New York, Oregon, Pennsylvania, Rhode Island, Vermont, Washington, & Washington D.C.**
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.