Unrivaled Customer Service
And Expert Tech Advice!  
Same Day Shipping Before 11 PM ET
My Cart
Shop By Vehicle
Shop By
Close Menu
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates

JEGS Performance Products 110071

90° Push-Loc Hose End -6AN

JEGS Performance Products 110071


jegs shipping
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
JEGS Performance Products 110071 90° Push-Loc Hose End -6AN $9.99
90° Push-Loc Hose End
  • -6AN
  • Black Anodized
  • 250 psi
  • 1/pkg
  • Standard 37° AN Adapters

  • Specifications:

    90 Degree
    Fitting Type
    Hose to AN
    Fitting Finish
    Adapter Attachment
    Female Threads
    Hose End Size
    -6 AN
    Adapter Size
    -6 AN
    Shipping Weight:
    Package Height:
    Package Width:
    Package Depth:
    Manufacturer's Part Number:

    Designed for oil, and water lines (not power steering, brakes, or nitrous), these fittings must be used with Push-Loc or Twist-Lok Hose. They offer maximum weight reduction, install easily with a push & twist hose barb, rated at 250 psi, and connect to standard 37° AN adapters.

    Click here for JEGS Push-Loc Hose

    110071 is rated 4.0 out of 5 by 2.
    Rated 3 out of 5 by from Does what it does Got a pair of these to use with a transmission cooler install. Jeg's Push-Loc hose slips on very easily when lubricated, despite some reviews I've read elsewhere that state they're nearly impossible to slip on. In fact, they slipped on so easily I was worried I had ordered the wrong size of something! A quick tug test, then a full-on tug-of-war between me and three other guys in the shop quickly put to rest any concerns that it might not hold. ;) They are a bit awkward, however. The hose-stop piece is loose on the Push-Loc end, and teeters a bit when installing the hose, causing it to bind up slightly. If you want the hose to seat inside the lip this little stopper provides, you'll have to be quick about maneuvering it into place, 'cause once the fitting stops moving inside the hose for more than a second or two, it's locked into place and will have to be cut off. More bizarrely, the included instructions, as well as the instructions on Jegs' website, show a very different configuration than what's included in the package. The instructions show a sort of cosmetic sleeve, and imply that it somehow contributes to locking the hose onto the fitting. This sleeve is NOT included in the package, leading me to believe that it is either not required, or that the design has been changed. There's no information to clarify this that I can find. These fittings have been installed for ~2 weeks as of this review without the sleeves pictures in the instructions, and I have no signs of leaks or hose slippage. I deducted two stars from this rating due to the confusion and concern resulting from the unclear instructions.
    Date published: 2015-09-07
    • y_2018, m_4, d_25, h_5
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
    • cp_1, bvpage1
    • co_hasreviews, tv_1, tr_1
    • loc_en_US, sid_10001_10001_646602, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    what size hose can be used on the push lock side?

    Asked by: jspd
    You will need to match the pushlock size to the AN size, in this case a -6 pushlock hose.
    Answered by: Rusty B
    Date published: 2018-03-08
    • y_2018, m_4, d_25, h_5CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_1
    • loc_en_US, sid_10001_10001_646602, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs
    Items You Need
    Items You May Also Consider
    Some parts are not legal for use in California or other states with similar laws / regulations