Chrome 100 AMP
- JEGS Chrome 1-Wire GM Alternator 555-10112
- JEGS High-Output Alternator Wiring Kit 555-10510
- JEGS Alternator Mounting Bracket 555-50546
- JEGS High-Flow Water Pump 555-51002
- JEGS Water Pump Pulley 555-504115
- JEGS Water Pump Bolt Kit 555-83901
- JEGS Crankshaft Pulley 555-504114
- JEGS Power Steering Pump Brackets 555-60796
- JEGS Power Steering Pulley 555-504196
- JEGS Saginaw-Style Power Steering Pump 555-60700
Time for Alternator Repair or an Upgrade?
JEGS 1-Wire Alternator means just that... simply connect one wire from the alternator to the battery, and you're done. One-wire alternators have a turn-on point (sometimes called "cut in"), typically about 1200 engine RPM. JEGS has developed rotor poles and stator stacks that carry a higher magnetism to provide an instant regulator "cut in" without engine acceleration. Our alternators are manufactured with an exclusive low "cut in" of 880 engine RPM, which is much lower than any other alternator of its type. This is the speed where the internal sense circuitry connects the battery to the voltage regulator and turns on the alternator to start charging. Once the voltage regulator engages, the alternator will stay on and charge until the engine stops completely. Alternators are available in natural aluminum, black or chrome finishes, v-belt or serpentine belt pulleys, and amperage choices of 70, 80, 100,140 & 145. These models fit from 1971-1986 GM applications.
Will this fit on a 400 block
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.