1.6 Ratio for 3/8 in. Stud
- A super affordable way to reduce internal valve train friction and valve stem wear.
- Non-Self aligning style rocker arms with long slot allows for up to .550 valve lift
- Heat-treated grooved rocker pivot balls to promote oiling & prevent galling
- Locking Nuts to prevent rockers from loosening out of adjustment
- Roller Tips reduce friction leading to an additional 10 to 15 horsepower
If i have 062 vortec heads modified with welded guide plates and 3/8" will these work?
will these work with center bolt valve covers
Will these work on a 350 vortec?
will I have to change my valve springs going from 1.50 to 1.60 ? my motor is a 355 small block with L78 heads..........
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.