0
0
Account Login
1-800-345-4545
Gift Cards
Track Order
Help Center

JEGS Cast Steel Roller Tip Rocker Arms for 1955-1986 Small Block Chevy [Set of 16]

555-20186


Product Q&A
View Now
Click image to zoom
Cast Steel Roller Tip Rocker Arms for 1955-1986 Small Block Chevy [Set of 16]
$149.99
$123.99
SAVE $26.00
More than 10 available
Cast Steel Roller Tip Rocker Arms
  • 1955-1986 Small Block Chevy 262-400
  • 1.5 Ratio for 3/8 in, Studs
  • Up to 0.550 in. Valve Lift

    Includes:
  • (16) Rocker Arms
  • (16) Pivot Balls
  • (16) Polylock Nuts with 5/8 in. Hex Head
  • Set of 16
  • Ships
    QTY

    Items You May Also Consider

    20186 - JEGS Cast Steel Roller Tip Rocker Arms is rated 4.7 out of 5 by 6.
    Rated 5 out of 5 by from rockers Have used several sets of these rockers on SBC's (pre LS). The only issue u may have is with the poly lock. Some OEM setups will not have enough threads for the allen lock, so just use an oem lock nut.
    Date published: 2021-10-14
    Rated 3 out of 5 by from Mostly good, 6.25% Failure Rate 1 of the 16 were not sitting right during assembly, further inspection showed a burr on the push rod seat. 1 out of 16 is a 6.25% manufacturing FAILURE RATE. Because I had little time, I used a carbide to deburr the part and was able to use it. I expect much better quality from JEGS, especially when they put their name on the part.
    Date published: 2022-09-26
    • y_2022, m_11, d_26, h_21
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
    • cp_1, bvpage1
    • co_hasreviews, tv_4, tr_2
    • loc_en_US, sid_10001_10001_3721411, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    How much thread engagement for the rocker lock? I’m referring to the Allen head lock screw , not the adjustment nut.

    Asked by: Jegs 20186
    Jegs 555-20186 there is no specific spec for the lock screw
    Answered by: langus
    Date published: 2022-11-15

    Will these work on 882 heads with this cam kit https://www.jegs.com/i/Lunati/638/10120701K/10002/-1 It’s a l48 350, do they need to be self aligning or do I need to purchase guide plates

    Asked by: Jimmy6784
    Those will need to be used with guide plates.
    Answered by: BrandonJ
    Date published: 2018-04-28

    Are these 1.52, or 1.5 rocker arms? Gets confusing to see them in different places with one of those two specs. Thanks.

    Asked by: blackdeathmessenger
    These rocker arms have 1.5 ratio.
    Answered by: Rusty B
    Date published: 2018-09-18

    WILL THEY WORK ON MY CAMEL HUMP # 39117291 HEADS?

    Asked by: BMER
    Yes, these should fit your cylinder heads.
    Answered by: Rusty B
    Date published: 2018-03-30

    Will they work on blueprint heads H8002k.

    Asked by: Bryan G
    Correct
    Answered by: SteveM
    Date published: 2018-02-24

    are all rocker arms smog legal?

    Asked by: 1986irocz
    Most are not CARB approved including these.
    Answered by: Rusty B
    Date published: 2020-03-09
    • y_2022, m_11, d_27, h_21CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_6
    • loc_en_US, sid_10001_10001_3721411, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    Items You Need

    Recently Viewed

    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.

    Tools:

    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.