Over 50 years have passed since your GM A-body rolled off the assembly line. In that time, the elements have had a chance to take their toll, and one common spot is at the upper dash/lower windshield. Rather than patching a number of holes and thin spots, replace the entire assembly with a new panel from JEGS. Designed to OE standards, this piece makes use of heavy 16-gauge steel with an EDP-coating for rust protection.
- Dimensions: 56 7/8 in. Width x 5 in. Depth x 3 1/2 in. Height
Note: Welding is required for the installation of this patch panel.
Special Note: Before packaging by our team of professionals, each panel sold by JEGS goes through a thorough inspection for flaws. It is not uncommon for sheet metal panels to have surface scratches, small dings, or other minor imperfections. These imperfections are not considered damage and will be worked out through the bodywork phase with various levels of sanding and priming. The EDP coating on each panel is used as a protectant during shipping and storage and is not intended to be a finish coat. Proper prepping and priming are required during the bodywork process to protect the metal surface.
Create a Secure Upper Dash/Lower Windshield Seal
Resolve rust damage to the upper dash and lower windshield area of your car with a patch panel from JEGS.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.