Dual 4150-Series / Square Bore Flange Carburetors
To supply the proper amount of fuel to the carburetor and Cheater System, a fuel pump must be used that is designed to operate between 5 and 10 PSI, with a flow rate of 0.1 gallons per hour / horsepower at 6 PSI. For example, an engine that produces 450 horsepower when the Cheater System is activated will require a fuel pump that flows at least 45 gallons per hour at 6 PSI.Tech Notes:
Easy Horsepower Gains
NOS Cheater systems are designed for use on 350 ci or larger carbureted engines. Large nitrous and fuel solenoids are adjustable for an increase of anywhere between 150 to 250 horsepower. Cheater systems utilize a thin 1/2-inch injector plate between the carburetor and intake manifold offering efficient nitrous distribution while still providing under-hood clearance.
Cheater systems include a 10 lb. nitrous bottle, four (4) stages of jets, aircraft-quality steel braided line and all other necessary electrical and mounting hardware for a complete nitrous system installation.
- Single stage nitrous system
- Large nitrous and fuel solenoids
- Thin 1/2 in. injector plate
- Easy to install with provided step-by-step instructions
JEGS Easy Kits are designed by JEGS professionals so you get all the parts you need.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.