Unrivaled Customer Service
And Expert Tech Advice!  
Same Day Shipping Before 11 PM ET
My Cart
Shop By Vehicle
Shop By
Close Menu
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates

RAM Clutches Force 9.5 Dual Disc Clutch System 1955-85 Small Block & Big Block Chevy

RAM Clutches 75-2127


made in usa
jegs shipping
FREE Shipping
Estimated to ship directly from the manufacturer on 07/23/18
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
RAM Clutches Force 9.5 Dual Disc Clutch System 1955-85 Small Block & Big Block Chevy $975.00
Force 9.5 Dual Disc Clutch System
  • 1955-85 Small Block & Big Block Chevy
  • 9-1/2'' Diameter
  • 1-1/8''-26 Spline
  • 153-Tooth Ring Gear
  • '0' Internal Balance
  • 300 Series Disc

  • RAM Clutches 75-2127 Details


    The RAM Force 9.5 has a strap driven floater plate for completely quite operation and works well for high horsepower street only cars and trucks. Featuring 300 series friction material, the clutch is smooth engaging and yet conservatively rated at 800 ft/lbs holding capacity.


    Mounting Hardware Included
    Flywheel Included
    Pressure Plate Style
    Disc Material
    Disc Diameter (in.)
    Input Shaft Diameter (in.)
    Pilot Bushing Included
    Throwout Bearing Included
    Counterweight Assist
    Disc Diameter (mm)
    Input Spline Quantity
    Sold as a kit
    Flywheel Material
    Billet aluminum
    Alignment Tool Included
    Disc Style
    1 sprung hub, 1 unsprung hub
    Manufacturer's Part Number:

    The Best of Both Worlds: Street Manners with Track Performance
    RAM's Force 9.5 is the ideal entry level dual disc clutch for street use. With a torque capacity of roughly 800 ft/lbs and moderate clamp pressure, these clutches handle small blower or turbo applications and provide a light pedal effort similar to the stock clutch (RAM 2010 Camaro test drivers couldn't tell the stock clutch was changed). The floater plate is driven from 3 sets of straps to eliminate rattle at idle; the top clutch disc has a sprung hub assembly to absorb the clutch's initial engagement and reduce chatter.

    Engineered for today's late model performance cars and older vehicle engine swaps, most RAM Dual Disc Clutches are compatible with factory hydraulic release mechanisms. A clutch's height is critical to proper operation; it prevents the need for spacers or other modification. Dual disc clutches that bolt to a stock flywheel can be a release problem. For clutches that malfunction, add a RAM Internal Hydraulic Bearing.

    The purpose of these clutches is to provide smooth drivability for high power levels that wasn't previously available from single disc clutches with aggressive friction material. The clutch assembly also needs enough weight so it can be driven at lower RPM and maintain vehicle inertia without bucking. If the clutch assembly is too light, low-end drivability suffers. Applications with large camshaft profiles are prone to this and need the inertia of a heavier unit to sustain low-speed drivability. Road race type vehicles, however, benefit from a smaller clutch's lighter weight because the vehicle drives deeper into turns before letting off the throttle and accelerates quicker back to torque range out of turns.

    Click Here for Ram Dual Disc Clutch Application Guide

    Does RAM Clutches 75-2127 fit your vehicle?

    Narrow Results


    • CC: 5737
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )
    Items You Need
    Some parts are not legal for use in California or other states with similar laws / regulations