- Overside piston rod guide increases stability
- 24 clicks of rebound adjustment in a wide range
- Internal bump stop
- Billet end cap with integrated debris wiper
- External hard anodizing
- 5/8 in. hardened shaft
- PTFE piston wiper
- Monotube design with a larger piston
- 2 1/2 in. inside diameter coil spring
- Ultra high-tensile chrome silicon
Note: For use with Ridetech Rear 4-Link System. Will not work with stock suspension.
Enhance Your Ride Quality
Ridetech offers hot rodders the ultimate in handling performance, ride quality, and simplicity with coil-over suspension components. Each Coil-Over System includes two monotube shocks with 2 1/2 in. steel springs containing a linear spring rate accuracy capable of maintaining long-term ride height. RideTech Smooth Body HQ (Handling Quality) Shocks are built on a monotube design, optimizing performance by using fewer internal components than twin-tube shocks. The Monotube key advantages are the use of a larger piston, more precise valving and efficient oil flow path to create cooler operating temperatures for predictably-consistent performance, with respect to damping and reliability in extreme environments.
Note: Front Systems are for use with Ridetech StrongArm Control Arms; Rear Systems are for use with either Ridetech Rear Suspension Systems or rear StrongArms (neither intended for stock suspensions unless noted).
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.