Rough Country 17431 7in GM Suspension Lift Kit (14-18 1500 PU 4WD, Aluminum/Stamped Steel)
834-17431
Product Q&A
View Now
GM
Rough Country 17431 Features:
Provides highly sought level stance
- Provides highly sought level stance
- Front Kit Components: Lifted knuckles, Front crossmember, Rear crossmember, Upper strut spacers, Replacement Tie Rod Ends, CV spacers, Differential drop brackets, Differential skid plate, Sway-bar drop brackets, Hardware
- Install Time: 8-10 hours
- Rear Kit Components: Fabricated lift blocks, Brake line brackets, U-bolts, Hardware
- Tire & Wheel Size Combinations: 315/55 R20 - 20x9, Offset: +12 to +18mm (Models equipped with Factory 18-inch or larger wheels must run 18-inch or larger wheels if changing to aftermarket wheels)
Rough Country 17431 Fitment Notes:
- IMPORTANT! - Installation of larger tires will require a Hypertech Speedometer Calibrator (#732501) Does not fit Hybrid eAssist models Does NOT fit models with stock Cast Steel Control Arms Does NOT fit GMC Denali models with Magnetic Ride Control. Requires cutting and drilling. If wider than 35x12.50 R20 tires are used, offset wheels will be required and trimming may be required. 18-inch or larger wheels are required. Please view installation instructions for complete information on proper tire/wheel combinations. If truck is equipped with a mass damper on the front differential, the damper must be removed.
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.