0
0
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories


Hi, ! (Not you?)
My Account
1-800-345-4545
Track Order
Help
PJ1 SP134

PJ1 Engine Enamel Ford Light Blue

322-SP134

ORMD Item - Ground Shipping Only
made in usa
Ships

$5.99
PJ1 Engine Enamel Ford Light Blue $5.99
Out of stock
QTY
Engine Enamel
  • Ford Light Blue
  • 11 oz Aerosol
  • PJ1 SP134 Details

    Engine Enamel

  • Features EZ Touch Conical Nozzle
  • Maximum Heat Dissipation And Durability
  • Ceramic Resins Resist Heat Up To 550° F
  • Dry To Touch In 30 Minutes / Handle In 1 Hour
  • Resistant To Oil And Other Automotive Fluids
  • Will Not Blister/Flake/Crack/Peel
  • Use on Engine Block And Underhood Accessories
  • Engine Era Application 1960-1973

  • Specifications:

    Application
    Automotive
    Color
    Blue
    Manufacturer's Part Number:
    SP134

    VHT Engine Enamel is a unique formula of urethane resins that resist fading, harsh solvents, corrosion, and 550°F temperatures. No other air-dry coatings withstand the contents of today's cleaners & fuel as well as VHT. Factory engine colors available for restoration and customization.

    To Apply
  • Do not use in temperatures less than 70°F or on parts below room temperature
  • Thoroughly clean surface--remove all grease, oil, loose paint, and rust
  • Lightly sand any areas already painted, making sure to feather rough edges
  • Wipe parts to be painted with a tack cloth, carefully removing dust and debris
  • Primer is not required but you can spot prime as needed
  • Hold VHT can 12"-15" away from prepped surface
  • Spray enamel in one direction using long, steady strokes. Repeat in opposite direction.
  • Wait approximately 30 minutes before recoating--apply only enough to color surface evenly
  • Excessive application is unnecessary and will cause blistering and loss of adhesion
  • If touch-up is needed after 4 hours, light sanding may be required

    To Cure
    Whichever curing method you choose must be done slowly
  • Air: Enamel dries in 1 hour and cures overnight
  • Booth: Bake 15 minutes at 300°F then 30 minutes at 350°F (improves durability and resistance to salt spray, chemicals, and humidity)
  • Engine: Idle engine for 15 minutes and then let cool; idle engine again no more than 1 hour and let cool
  • Operation: The inherent heat output during operation of an engine or exhaust can cure the enamel

  • SP134 is rated 4.0 out of 5 by 1.
    Rated 4 out of 5 by from Covers very good Very good product and good service , on time shipment.
    Date published: 2016-09-11
    • y_2018, m_12, d_16, h_1
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_US, sid_10001_10001_51614, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    Items You Need

    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.

    Tools:

    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.