Weigh Safe Turnover Ball 10" Drop Hitch with 2" Shank
977-LTB10-2
Product Q&A
View Now
10" Drop Hitches
Specifications:
- Shank: 2"
- Ball: 2″ & 2-5/16″ Stainless Steel Turnover Ball
- Max GTW: 8000 lbs 2" Ball / 10,000 lbs 2-5/16" Ball
- Max Tongue: 1,500 lbs
- Drop Hitch Adjustments: 1" Increments
- Weight: 20 lbs
- Hitch Material: Aircraft Grade Aluminum and Stainless Steel
- Double Lock Pin: Key Lock Included
- Rise: All hitches may be used in rise position *Gain 1 inch (e.g. 10” drops are 11” rises)
- Total Height: Add 3 inches (*e.g. 10” drops measure 13 inches from the top of the receiver to the hitch base)
- Hitch Pin Hole: 5/8" Diameter
Please Note: When drivers turn their tow-ball around in a non-towable position, they are therefore not in a towing state of mind and potentially less cautious driving over bumps and dips. In this situation, often the lower ball will come in contact with the road and can cause damage to the ball and/or hitch. Due to the extended length of the drop given by the extra 3″ created by the hanging tow ball, the 180 Hitch MUST NOT be turned around and placed in a non-towable position. The product warranty is void under these circumstances.
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.