Big Block Chevy Marine
Modern Cylinder Heads Require a New Type of Gasket
Why use a Fel-Pro Multi-Layer Steel Cylinder Head Gasket? Because more power per cylinder, higher operating temperatures, and thinner head and block castings demand a modified gasket. MLS Gaskets are stronger, more forgiving, and capable of sealing despite movement between the head and block. Such motion results from: lighter, thinner aluminum head castings that are more susceptible to thermal expansion; computer controls that can dramatically increase engine output; reduced clamping force that prevents stress points and cylinder bore distortion.
MLS Technology was developed to overcome sealing challenges. The number of layers in an MLS Gasket ranges from two to five, depending on the engine's sealing characteristics. Generally, the more layers, the more motion the gasket endures. There are multiple solid layers of heat-treated stainless steel separated by a very thin rubber coating, and the layers are either active (absorbing motion between the head and block) or shim (giving the gasket its correct compressed thickness). Gaskets are sold each.Features
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.