Hellwig Rear Sway Bar for 1978-1988 GM A-Body and GM G-Body
207-55809
Only $429.99
Ships directly from the manufacturer on
09/24/19
Only $335.00
Ships directly from the manufacturer on
09/30/19
The Hellwig Motorsports Car Sway Bars provide modern technology for your vintage muscle car and leading performance for your modern vehicle. These sway bars are precision engineered and manufactured at Hellwig's ISO9001 certified facility in Visalia, CA. Hellwig is the only aftermarket manufacturer that offers solid, tubular, and heat-treated sway bars to match any suspension requirement. . Hellwig's commitment to quality shows in the details, such as end treatments where the sway bar is tapered from round to flat to eliminate stress risers. Also, the ends are radiused for better clearance and a clean appearance. All bends are done on computer-controlled benders to provide consistent bends for a sway bar that fits right every time. Hellwig Motorsports Tubular Sway Bars feature the latest designs and utilize high-strength tubular DOM steel to maximize performance yet with up to half the weight of solid bars. Hellwig Motorsports Solid Sway Bars are a bit heavier but are unmatched in strength and durability with an average tensile strength of 170,000 psi.Track Tested and Street Proven
Does Hellwig 55809 fit your vehicle?
Narrow Results
Filter By Year
Filter By Make
Filter By Model
Filter By SubModel
Filter By EngineType
Filter By CC
Filter By Liter
Filter By Aspiration
1980-1981 OLDSMOBILE CUTLASS
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: BROUGHAM
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1981 CHEVROLET MALIBU
- CC: 5031
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.0
- SubModel: BASE
- CUI: 305
- EngineType: V8 ( 5.0 L / 305 )
1981 BUICK CENTURY
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: BASE
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1980-1981 OLDSMOBILE CUTLASS
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.7
- SubModel: LS
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1981 CHEVROLET MONTE CARLO
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.4
- SubModel: BASE
- CUI: 267
- EngineType: V8 ( 4.4 L / 267 )
1981 BUICK CENTURY
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.7
- SubModel: LIMITED
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1980-1983 CHEVROLET MALIBU
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: CLASSIC
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1980-1981 OLDSMOBILE CUTLASS CRUISER
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- EngineType: ALL
- SubModel: ALL
1978 PONTIAC GRAND PRIX
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: BASE
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1982 PONTIAC GRAND PRIX
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: LJ
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1980 OLDSMOBILE CUTLASS
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: LS
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1981 PONTIAC LEMANS
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.3
- SubModel: BASE
- CUI: 265
- EngineType: V8 ( 4.3 L / 265 )
1979 CHEVROLET MALIBU
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.3
- SubModel: CLASSIC
- CUI: 200
- EngineType: V6 ( 3.3 L / 200 )
1981 CHEVROLET MALIBU
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: BASE
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1981 BUICK CENTURY
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.3
- SubModel: LIMITED
- CUI: 265
- EngineType: V8 ( 4.3 L / 265 )
1980-1981 OLDSMOBILE CUTLASS SUPREME
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: BROUGHAM
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1978 PONTIAC LEMANS
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: BASE
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1982 PONTIAC GRAND PRIX
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.1
- SubModel: BROUGHAM
- CUI: 252
- EngineType: V6 ( 4.1 L / 252 )
1978-1980 BUICK REGAL
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- EngineType: ALL
- SubModel: ALL
1982-1983 OLDSMOBILE CUTLASS CRUISER
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.0
- SubModel: BASE
- CUI: 307
- EngineType: V8 ( 5.0 L / 307 )
1980 OLDSMOBILE CUTLASS SUPREME
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.3
- SubModel: BROUGHAM
- CUI: 260
- EngineType: V8 ( 4.3 L / 260 )
1979 CHEVROLET MONTE CARLO
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.3
- SubModel: BASE
- CUI: 200
- EngineType: V6 ( 3.3 L / 200 )
1985-1988 CHEVROLET MONTE CARLO
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.3
- SubModel: BASE
- CUI: 262
- EngineType: V6 ( 4.3 L / 262 )
1980 PONTIAC GRAND PRIX
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- EngineType: ALL
- SubModel: ALL
1982 OLDSMOBILE CUTLASS CRUISER
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: BASE
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1979 CHEVROLET MALIBU
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: CLASSIC LANDAU
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1978-1979 PONTIAC GRAND LEMANS
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- EngineType: ALL
- SubModel: BASE
1980 CHEVROLET MALIBU
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: BASE
- CUI: 229
- EngineType: V6 ( 3.8 L / 229 )
1982 OLDSMOBILE CUTLASS SUPREME
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.0
- SubModel: BROUGHAM
- CUI: 307
- EngineType: V8 ( 5.0 L / 307 )
1979 CHEVROLET MALIBU
- CC: 5031
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.0
- SubModel: CLASSIC
- CUI: 305
- EngineType: V8 ( 5.0 L / 305 )
1980 OLDSMOBILE CUTLASS SUPREME
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1981 PONTIAC LEMANS
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: BASE
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1982-1983 CHEVROLET MONTE CARLO
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.3
- SubModel: BASE
- CUI: 260
- EngineType: V6 ( 4.3 L / 260 )
1981 PONTIAC GRAND PRIX
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: LJ
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1980-1981 OLDSMOBILE CUTLASS SUPREME
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1979 CHEVROLET MONTE CARLO
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: BASE
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1984 OLDSMOBILE CUTLASS SUPREME
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- EngineType: ALL
- SubModel: ALL
1981 BUICK REGAL
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.3
- SubModel: LIMITED
- CUI: 265
- EngineType: V8 ( 4.3 L / 265 )
1981 PONTIAC GRAND PRIX
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.7
- SubModel: LJ
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1979-1980 CHEVROLET MALIBU
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- EngineType: ALL
- SubModel: CLASSIC ESTATE
1978 PONTIAC GRAND PRIX
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.9
- SubModel: BASE
- CUI: 301
- EngineType: V8 ( 4.9 L / 301 )
1981 CHEVROLET MALIBU
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: BASE
- CUI: 229
- EngineType: V6 ( 3.8 L / 229 )
1978-1979 PONTIAC GRAND PRIX
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.9
- SubModel: LJ
- CUI: 301
- EngineType: V8 ( 4.9 L / 301 )
1982 OLDSMOBILE CUTLASS SUPREME
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.3
- SubModel: BROUGHAM
- CUI: 260
- EngineType: V6 ( 4.3 L / 260 )
1982 OLDSMOBILE CUTLASS SUPREME
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: BROUGHAM
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1978 PONTIAC GRAND PRIX
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.0
- SubModel: BASE
- CUI: 305
- EngineType: V8 ( 5.0 L / 305 )
1982-1983 OLDSMOBILE CUTLASS SUPREME
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.3
- SubModel: BASE
- CUI: 260
- EngineType: V6 ( 4.3 L / 260 )
1980 PONTIAC GRAND LEMANS
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: BASE
- CUI: 229
- EngineType: V6 ( 3.8 L / 229 )
1982 CHEVROLET MONTE CARLO
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.4
- SubModel: BASE
- CUI: 267
- EngineType: V8 ( 4.4 L / 267 )
1979 CHEVROLET MONTE CARLO
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.4
- SubModel: BASE
- CUI: 267
- EngineType: V8 ( 4.4 L / 267 )
1987 OLDSMOBILE CUTLASS SUPREME
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- EngineType: ALL
- SubModel: 442
1980-1981 OLDSMOBILE CUTLASS SUPREME
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.3
- SubModel: BASE
- CUI: 260
- EngineType: V8 ( 4.3 L / 260 )
1984 OLDSMOBILE CUTLASS CALAIS
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.3
- SubModel: BASE
- CUI: 260
- EngineType: V6 ( 4.3 L / 260 )
1980 OLDSMOBILE CUTLASS
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.7
- SubModel: LS
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1982 OLDSMOBILE CUTLASS CRUISER
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.3
- SubModel: BASE
- CUI: 260
- EngineType: V8 ( 4.3 L / 260 )
1979-1980 PONTIAC LEMANS
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.9
- SubModel: BASE
- CUI: 301
- EngineType: V8 ( 4.9 L / 301 )
1978-1979 PONTIAC LEMANS
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: SAFARI
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1980 OLDSMOBILE CUTLASS
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1980 CHEVROLET MALIBU
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: SPORT
- CUI: 229
- EngineType: V6 ( 3.8 L / 229 )
1982-1983 BUICK REGAL
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.7
- SubModel: ESTATE WAGON
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1980 PONTIAC LEMANS
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.9
- SubModel: SAFARI
- CUI: 301
- EngineType: V8 ( 4.9 L / 301 )
1981 BUICK REGAL
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.3
- SubModel: BASE
- CUI: 265
- EngineType: V8 ( 4.3 L / 265 )
1981 PONTIAC LEMANS
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.3
- SubModel: SAFARI
- CUI: 265
- EngineType: V8 ( 4.3 L / 265 )
1980 CHEVROLET MALIBU
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: SPORT
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1979 CHEVROLET MONTE CARLO
- CC: 5031
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.0
- SubModel: BASE
- CUI: 305
- EngineType: V8 ( 5.0 L / 305 )
1979 CHEVROLET MALIBU
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: SPORT
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1978-1981 PONTIAC GRAND LEMANS
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- EngineType: ALL
- SubModel: SAFARI
1979 CHEVROLET MALIBU
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.4
- SubModel: CLASSIC LANDAU
- CUI: 267
- EngineType: V8 ( 4.4 L / 267 )
1980 PONTIAC GRAND LEMANS
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.9
- SubModel: BASE
- CUI: 301
- EngineType: V8 ( 4.9 L / 301 )
1979-1980 CHEVROLET MALIBU
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- EngineType: ALL
- SubModel: ESTATE
1981-1982 BUICK REGAL
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- EngineType: ALL
- SubModel: SPORT
1982-1984 CHEVROLET MONTE CARLO
- CC: 5736
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1982-1984 BUICK REGAL
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.3
- SubModel: BASE
- CUI: 260
- EngineType: V6 ( 4.3 L / 260 )
1981 PONTIAC LEMANS
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.9
- SubModel: SAFARI
- CUI: 301
- EngineType: V8 ( 4.9 L / 301 )
1980-1981 OLDSMOBILE CUTLASS SUPREME
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.7
- SubModel: BROUGHAM
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1978 CHEVROLET MALIBU
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- EngineType: ALL
- SubModel: ALL
1979 PONTIAC LEMANS
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.9
- SubModel: SAFARI
- CUI: 301
- EngineType: V8 ( 4.9 L / 301 )
1985 BUICK REGAL
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.3
- SubModel: LIMITED
- CUI: 260
- EngineType: V6 ( 4.3 L / 260 )
1980 CHEVROLET MONTE CARLO
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.4
- SubModel: SPORT
- CUI: 267
- EngineType: V8 ( 4.4 L / 267 )
1981 PONTIAC GRAND PRIX
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: BROUGHAM
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1981-1983 BUICK REGAL
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.7
- SubModel: BASE
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1980 CHEVROLET MALIBU
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.7
- SubModel: SPORT
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1982-1983 CHEVROLET MALIBU
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.3
- SubModel: CLASSIC
- CUI: 260
- EngineType: V6 ( 4.3 L / 260 )
1979 CHEVROLET MALIBU
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.3
- SubModel: BASE
- CUI: 200
- EngineType: V6 ( 3.3 L / 200 )
1984 OLDSMOBILE CUTLASS CALAIS
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- EngineType: ALL
- SubModel: HURST
1982 OLDSMOBILE CUTLASS SUPREME
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.3
- SubModel: BROUGHAM
- CUI: 260
- EngineType: V8 ( 4.3 L / 260 )
1984 OLDSMOBILE CUTLASS CALAIS
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.0
- SubModel: BASE
- CUI: 307
- EngineType: V8 ( 5.0 L / 307 )
1981 PONTIAC GRAND PRIX
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: BASE
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1981-1987 BUICK REGAL
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: BASE
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1983 OLDSMOBILE CUTLASS SUPREME
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- EngineType: ALL
- SubModel: BROUGHAM
1980-1981 CHEVROLET MALIBU
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- EngineType: ALL
- SubModel: CLASSIC LANDAU
1982 BUICK REGAL
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- EngineType: ALL
- SubModel: LIMITED TURBO
1986-1987 BUICK REGAL
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.0
- SubModel: BASE
- CUI: 307
- EngineType: V8 ( 5.0 L / 307 )
1982 PONTIAC GRAND PRIX
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: BASE
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1978-1979 PONTIAC LEMANS
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.0
- SubModel: SAFARI
- CUI: 305
- EngineType: V8 ( 5.0 L / 305 )
1982 PONTIAC GRAND PRIX
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 5.7
- SubModel: LJ
- CUI: 350
- EngineType: V8 ( 5.7 L / 350 )
1982 PONTIAC GRAND PRIX
- CC: 3800
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 3.8
- SubModel: BROUGHAM
- CUI: 231
- EngineType: V6 ( 3.8 L / 231 )
1980 BUICK CENTURY
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- EngineType: ALL
- SubModel: LIMITED
1981 PONTIAC GRAND PRIX
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.3
- SubModel: BASE
- CUI: 265
- EngineType: V8 ( 4.3 L / 265 )
1980 OLDSMOBILE CUTLASS
- Fitment_Note: Drilling May Be Required~Adjustable Rate Sway Bar~Tubular Sway Bar~Rear Sway Bar Mounts To Axle And Frame; Not Control Arms
- Liter: 4.3
- SubModel: LS
- CUI: 260
- EngineType: V8 ( 4.3 L / 260 )
Some parts are not legal for use in California or other states with similar laws / regulations
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.