-6AN Female/Female Billet In-Line Fuel Filters
Reduce the risk of particulates clogging your fuel system with the JEGS 150009 billet in-line fuel filter. With a high flow rate and 10 microns (10 holes per inch) filtration, this filter is designed for EFI systems as a post-pump filter. Packaged in a durable billet aluminum body with threaded female ends this unit is easily installed. Designed to last, this unit can be disassembled and the woven stainless steel mesh filter can be removed for cleaning or replacement. Securely sealed with two o-rings, one for the filter, and the second for the housing.
- Ends use a 1 in. wrench to open filter, and secure to the fuel line
- The anodized coating protects the filter from corrosion
- Directional flow
- This fuel filter is directional, make sure the laser-etched arrow is following the flow of fuel to the carburetor or fuel injectors.
- When disassembling the filter for service, keep track of the component orientation otherwise it may not flow after reassembly.
Keep Your Fuel System Clean with an In-Line Fuel Filter
The JEGS 3 1/2 in. long billet in-line fuel filters provide a compact and efficient method to keep particulates out of your carburetor or fuel injection. These filters are manufactured from billet aluminum with a woven stainless steel mesh allowing for filtration up to 100 microns while flowing up to 100 gallons per hour (GPH). The -6AN female threads on each end allow for your choice of fittings to suit your needs. Drive with confidence knowing that your fuel system is clean.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.