GM 10-Bolt 8.5" (Corporate)
- When replacing a stock 2.56 and numerically lower ratio, the carrier must be replaced with a carrier of 2.73 or higher
- Does not work with pinion-mounted ABS sensor
- 1.626" Pinion Diameter
- 30 Spline Pinion
- 10-Bolt CoverFits: (with new-style 10-bolt housing)
- 1970-76 Bel-Air/Caprice/Impala/Chevelle/Olds F-85
- 1973-76 El Camino
- 1970-75 Nova
- 1970-81 Camaro/Firebird/GTO
- 1972-81 Z-28/Trans-Am
- 1977-87 K10/K20 (front)
- 1977-91 Blazer (front)
- 1980-02 C10/K10/Blazer/C1500/K1500 (rear)
- 1980-96 Suburban (rear)
- 1977-91 Suburban (front)
- 1979-96 G10/G20 VanIncludes:
- Pinion and carrier bearings & shims
- Pinion nut & seal
- Crush sleeve
- Cover gasket or RTV
- Ring gear bolts
- 75W-90 synthetic differential lube (2 quarts)
- Limited slip additive (4 ounces)
- Thread locker sealant
- Marking compound
- Application Brush
- Installation instructions
With high-quality grade steel to provide durability for street, highway, and occasional race use, JEGS Gear Sets are made utilizing modern machining and heat treating for added strength and miles of trouble-free service.
Also Available: JEGS Ring & Pinion Setup Tool Kit
By having the option to buy a JEGS installation kit with the JEGS gear sets, it has never been easier to install a ring and pinion.
Will this fit 04 Silverado 1500 rwd?
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.