JEGS 60401K Kit Includes:
- (1) JEGS Torque Converter 555-60401
- (3) JEGS Quick Shift Automatic Transmission Fluid (1-Gallon Container) 555-28071
- Converter diameter may vary based on Core Availability
- Does not fit transmissions that require lockup or clutch converters
- Small (10.75 in. Diameter bolt circle) flexplate or dual pattern flexplate required
- For Big Block applications, use JEGS XHD Converters
|Performance Torque Converter General Application Chart *|
|Rear Gear Ratio||Engine RPM Range & Compression Ratio||Converter RPM Stall Speeds **|
|Stock to 260°||Stock to 3.23||1000-4600|
8 to 9.5
|1500 to 1700|
|Stock to 265°||Stock to 3.23||1400-5000|
8 to 9.5
|1600 to 1800|
|265° to 280°||3.00 to 3.73||1600-6000|
9.5 to 10.5
|2200 to 2400|
|280° to 300°||3.55 to 4.56||2000-6500|
9.5 to 11
|3000 to 3400|
|280° to 310°||3.73 to 4.88||2800-7000|
10 to 11.5
|3500 to 3800|
10.5 to 12
* This chart is a guideline. The stall speed may vary in your application.
** Recommended for use with Small Block engines only
Quality Converters at Economical Prices
JEGS torque converters are economically priced and quality built units with the street enthusiast in mind. These converters are manufactured using high-quality materials that include industrial Torrington-type encased needle bearings, customized turbine hubs and impeller fins to maintain strength and durability and high-flow vents and channels for better cooling. JEGS converters are not designed for nitrous, turbo, blower, or big block applications.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.