- Big Shot Systems are designed for extensively-modified engines and intended primarily for competition applications. Stock Ford 5.0L blocks were not designed to accommodate a Big Shot's extra power. Thus a high-strength SVO block should be utilized.
- High cylinder pressures are generated when using a Big Shot System, greatly increasing the load on pistons, rods,and crank using high-strength forged components is mandatory
- Use only a high-quality racing ignition system with timing control.
Ford Wet EFI Nitrous Systems Include
- Empty 10 lb. nitrous bottle
- Jet assortment
- Nitrous solenoid with -6 AN supply line
- 1/2 in. fogging plate
- Nitrous and fuel fittings
- All necessary electrical hardware
Incredible Power at Your Finger Tips!
NOS Big Shot Nitrous System is the world's most powerful plate nitrous system. NOS Big Shot systems use a special "fogging" plate design that utilizes a unique spray bar equipped with tiny orifices for precisely dispensing a powerful nitrous/gasoline mixture for unbelievable horsepower gains. Power output is adjustable from 190-300 horsepower simply by changing fuel and nitrous jets.
Note: High cylinder pressures are generated with the use of these kits, this greatly increases the load on internal engine components. Forged internal engine parts are mandatory!
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.